Skip to main content
Egypt Globe Group
Construction3 SKUsHS 2521.00FOB · CIF · CFR Per-lot CoA

Egyptian Limestone — CaCO₃ 95 % Bulk, Dolomite & Coated Calcium Carbonate

Egyptian limestone for export: high-calcium limestone CaCO₃ ≥ 95 % (steel flux, cement, paper), dolomite CaMg 95 %, coated ground calcium carbonate 2–5 µm. Suez / Western Desert origin, HS 2521.00 / 2518.10 / 2836.50, CoA per lot before B/L, bulk FOB Damietta / Alexandria / Ain Sokhna.

3
SKUs in this sub-category
Certifications & standards
Applications served
100%
Lots CoA-verified before B/L
Catalogue

3 products ready for export

Quote any combination →

Egyptian limestone — high-calcium carbonate with lot-by-lot chemistry

Egypt's Eocene limestone plateaus — the Mokattam and Suez formations east of the Nile and the Western Desert carbonate belt — are among the purest high-calcium deposits on the Mediterranean, which is why they underpin the country's cement, steel and paper industries. Egypt Globe Group supplies three carbonate lines from this base: limestone CaCO₃ 95 % bulk from the Suez quarries for cement kilns, steel flux and paper mills; dolomite CaMg 95 % from the Western Desert for steel, glass and refractory batch; and coated ground calcium carbonate 2–5 µm for plastics, paint and rubber compounding.

A steel plant buying flux limestone prices the cargo on CaO and penalises SiO₂; a cement kiln controls its raw mix on CaCO₃ and MgO; a masterbatch compounder rejects a coated GCC lot on top-cut and moisture. Each is sensitive to a drift of one or two percent between lots. EGG's QA division samples at the quarry bench and again at the port, runs XRF chemistry and loss on ignition on every lot, and issues the Certificate of Analysis before the Bill of Lading. Lots outside the contractual chemistry or sizing are rejected at the loading port.

Technical specification

Limestone CaCO₃ 95 % — physical properties

ParameterSpecificationTest methodStandard
Size — steel flux grade10–40 mm lumpEN 933-1
Size — cement kiln feed0–50 mm crushedEN 933-1
Size — aggregate / filler grade0/5 mm and 5/20 mm fractionsEN 933-1EN 12620
Fines below 5 mm in lump grades≤ 5 %EN 933-1
Free moisture≤ 2.0 %Oven drying
Colour / originCream to light grey; Egypt, SuezVisual / Certificate of Origin

Limestone CaCO₃ 95 % — chemical analysis

ParameterLimitTest methodQA sampling
CaCO₃≥ 95 %ASTM C25 / EN 196-2 (XRF)Every lot
CaO≥ 53 %XRFEvery lot
MgO≤ 1.5 %XRFEvery lot
SiO₂≤ 2.0 %XRF / gravimetricEvery lot
Fe₂O₃≤ 0.3 %XRFPer lot
Al₂O₃≤ 0.5 %XRFPer lot
Loss on ignition (950 °C)≥ 42 %ASTM C25Every lot

Dolomite CaMg 95 % and coated calcium carbonate — comparison

ParameterDolomite CaMg 95 %Coated GCC 2–5 µmTest method
Principal assayCaCO₃ + MgCO₃ ≥ 95 % (grade); MgO ≥ 18 %, CaO ≥ 30 % on steel-grade lump — see Egyptian dolomiteCaCO₃ ≥ 98 %XRF / ASTM C25
SiO₂≤ 2 %≤ 0.5 %XRF
Fe₂O₃≤ 0.5 %≤ 0.1 %XRF
Particle size40–150 mm lump (steel) or crushed fractionsd₅₀ 2–5 µm; top cut ≤ 20 µmSieve / laser diffraction ISO 13320
Surface treatmentStearic acid coating 1.0–1.5 %Gravimetric
Whiteness / brightnessLight grey / cream≥ 95 (Ry, ISO 2470)Spectrophotometer
Moisture≤ 1 %≤ 0.3 %Oven drying
OriginEgypt, Western Desert / Eastern DesertEgyptCertificate of Origin

Logistical & QA parameters

ParameterDetail
MOQ — containerised (FCL)100 MT coated GCC; 1,000 MT limestone and dolomite
MOQ — break-bulk vessel2,000 MT limestone bulk (contracts to 200,000 MT); dolomite 1,000 MT; GCC to 5,000 MT
PackingBulk vessel · 1 MT FIBC jumbo bags · 50 kg PP woven bags
Loading portsDamietta (EGDAM), Alexandria (EGALY), El Dekheila (EGEDK), Ain Sokhna (EGSOK)
IncotermsFOB / CFR limestone; CIF / DAP coated GCC; full FOB / CFR / CIF set on request
Lead time2–4 weeks
Independent inspection protocolSGS / TÜV Austria / Intertek / Bureau Veritas: increment sampling of bulk cargo, draft survey, witness XRF and LOI, sealed retained samples
Internal QA gatePer-lot CoA (CaCO₃, MgO, SiO₂, Fe₂O₃, LOI, sizing, moisture) from the port laboratory before B/L; out-of-spec lots rejected at the loading port
HS code2521.00 limestone flux / cement stone · 2518.10 dolomite · 2836.50 calcium carbonate

QA verification chain

GateControlEvidenceWho · frequency
Quarry benchBench sampling, selective extraction away from marl and chert bandsBench XRF sheetEGG QA field team · per bench / per lot
Crushing, screening, grindingSize fraction and fines control; micronising and coating for GCCScreen check, PSD record, coating logProducer QC under EGG supervision · per shift
Port laboratoryXRF chemistry, LOI, moisture, sieve or laser PSDCoA before B/LEGG port laboratory · every lot
Independent inspectionBulk sampling, draft survey, witness testSGS / TÜV Austria / Intertek / Bureau Veritas certificateThird party · per vessel
Destination acceptanceBuyer plant laboratory re-test against CoABuyer report reconciled with CoABuyer · on arrival

Applications & markets

Standards & documentation

Request a quote

State grade (flux, kiln feed, aggregate, dolomite or coated GCC), sizing, quantity, destination and Incoterm; a written offer with CoA format and lead time is returned within 24 hours. Request a quote or request a quote directly.

Other sub-categories in Construction

Browse related products across construction.

Need a tender match for egyptian limestone — caco₃ 95 % bulk, dolomite & coated calcium carbonate?

Send the specification, tonnage and destination — a priced FOB / CIF / CFR offer with a sample Certificate of Analysis and inspection protocol comes back within 24 hours.

Request a Quote