Skip to main content
Egypt Globe Group
Construction2 SKUsHS 2520FOB · CIF · CFR

Egyptian Gypsum — Raw Rock CaSO₄·2H₂O ≥ 85 % & Calcined Plaster

Egyptian gypsum for export: raw gypsum rock CaSO₄·2H₂O ≥ 85 % (cement retarder, agricultural) and calcined plaster of Paris ≥ 90 % hemihydrate. Sinai origin, HS 2520.10 / 2520.20, CoA per lot before B/L, bulk or FIBC FOB Damietta / Alexandria / Ain Sokhna.

2
SKUs in this line
1,000
MOQ, metric tonnes
4
Loading ports
Construction · product line

Gypsum at a glance

Commercial and logistics terms across the 2 SKUs in this line. Each SKU page carries its own specification sheet and test methods; every lot is analysed before the Bill of Lading.

Gypsum — commercial reference

10 parameters
Products in this line
2 SKUs
HS codes
2520.10 · 2520.20
Origin
Egypt, Sinai
Minimum order
1,000 MT
Lead time
2–4 weeks from confirmed order
Packing
1 MT FIBC jumbo bags · 50 kg PP woven bags · Bulk vessel
Loading ports
Ain Sokhna · Alexandria · Damietta · El Dekheila
Destination regions
East Africa · Far East · Mediterranean · Red Sea & Gulf · South Asia
Standards & documents
ISO 9001:2015 · SGS
Incoterms
FOB · CFR · CIF

Taken from the SKU records in this line. Grade-specific limits and test methods are on each SKU page.

Egyptian gypsum — purity and combined water verified on every lot

Gypsum (calcium sulphate dihydrate, CaSO₄·2H₂O) occurs in Egypt as thick Miocene evaporite beds in Sinai and along the Red Sea and Gulf of Suez coasts, quarried by open-cast bench mining close to the Ain Sokhna and Damietta loading chains. Egypt Globe Group supplies two product lines from this resource: raw gypsum rock at ≥ 85 % CaSO₄·2H₂O for cement mills (set retarder), plasterboard feed and agricultural soil conditioning, and calcined gypsum plaster of Paris at ≥ 90 % hemihydrate for building plaster, moulds and casting.

For a cement mill, gypsum purity governs SO₃ dosing and therefore setting time of the finished cement; for a plasterboard line it governs slurry water demand and board strength. A lot that drifts from 88 % to 78 % dihydrate changes both. Many regional quarries ship on a single historical analysis. EGG's QA division samples every lot at the quarry face and again at the port, determines purity by combined-water and sulphate analysis (ASTM C471M / EN 13279-2), and releases the cargo on a Certificate of Analysis before the Bill of Lading. Lots below the contractual purity are rejected at the loading port.

Technical specification

Raw gypsum rock — physical properties

ParameterSpecificationTest methodStandard
Lump size — cement retarder grade0–50 mmEN 933-1 sieve analysisEN 13279-1 / ASTM C22
Lump size — plasterboard / calcining feed0–150 mmEN 933-1
Granule size — agricultural grade0–3 mmEN 933-1
Free moisture≤ 3.0 %ASTM C471MASTM C22 / C22M
Colour / appearanceWhite to light grey crystalline rockVisual
OriginEgypt, SinaiCertificate of Origin

Raw gypsum rock — chemical analysis

ParameterLimitTest methodQA sampling
CaSO₄·2H₂O purity≥ 85 % (cement retarder / plaster feed); ≥ 80 % agricultural gradeASTM C471M / EN 13279-2Every lot, quarry + port
Combined (crystal) water≥ 17.8 % at 85 % purity (pure dihydrate 20.9 %)Gravimetric, 45–230 °CEvery lot
SO₃≥ 39.5 %XRF / gravimetric BaSO₄Every lot
SiO₂ + acid insolubles≤ 5.0 %GravimetricEvery lot
Chloride (Cl⁻)≤ 0.10 %TitrationPer lot
MgO≤ 1.0 %XRFPer lot

Calcined gypsum plaster of Paris — physical & chemical properties

ParameterSpecificationTest methodStandard
Hemihydrate (CaSO₄·½H₂O) content≥ 90 %EN 13279-2 / ASTM C471MEN 13279-1
Combined water5–7 %GravimetricEN 13279-2
Fineness — residue on 150 µm sieve≤ 5 %EN 13279-2EN 13279-1
Initial setting time≥ 8 min (moulding) / ≥ 20 min (building plaster)Vicat, EN 13279-2EN 13279-1
Water / plaster ratio for standard consistency0.60–0.70EN 13279-2
AppearanceFine white powderVisual

Logistical & QA parameters

MOQ — containerised (FCL)
200 MT plaster; 1,000 MT raw rock
MOQ — break-bulk vessel
1,000 MT raw rock (contracts to 100,000 MT); plaster to 20,000 MT
Packing
Bulk vessel · 1 MT FIBC jumbo bags · 50 kg PP woven bags
Loading ports
Damietta (EGDAM), Alexandria (EGALY), El Dekheila (EGEDK), Ain Sokhna (EGSOK)
Incoterms
FOB (raw rock); FOB / CIF (plaster); CFR, DAP on request
Lead time
2–4 weeks
Independent inspection protocol
SGS / TÜV Austria / Intertek: increment sampling per ISO 3082-style bulk protocol, draft survey, witness purity and moisture test
Internal QA gate
Per-lot CoA (purity, combined water, SO₃, moisture, sizing) issued by the port laboratory before B/L; out-of-spec lots rejected at the loading port
HS code
2520.10 raw gypsum · 2520.20 plasters

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Quarry bench

    Face sampling, selective mining away from clay and anhydrite bands

    EvidenceBench analysis sheet

    EGG QA field team · per bench / per lot

  2. 2

    Crushing, screening, calcination

    Size fraction, moisture; kettle temperature and residence time for plaster

    EvidenceProcess log, screen check

    Producer QC under EGG supervision · per shift

  3. 3

    Port laboratory

    Purity by combined water and SO₃, moisture, sieve analysis

    EvidenceCoA before B/L

    EGG port laboratory · every lot

  4. 4

    Independent inspection

    Sampling, draft survey, witness test, sealed retained samples

    EvidenceSGS / TÜV Austria / Intertek certificate

    Third party · per vessel

  5. 5

    Destination acceptance

    Buyer mill laboratory re-test against CoA

    EvidenceBuyer report reconciled with CoA

    Buyer · on arrival

Applications & markets

Standards & documentation

Weighing origins? Egyptian vs Spanish gypsum compares purity limits, loading ports, 2024 export data by destination and order terms.

Construction

Other product lines in construction

Construction overview →

Frequently asked questions

What grades of Gypsum does Egypt Globe Group supply?
Egypt Globe Group supplies two product lines from this resource: raw gypsum rock at ≥ 85 % CaSO₄·2H₂O for cement mills (set retarder), plasterboard feed and agricultural soil conditioning, and calcined gypsum plaster of Paris at ≥ 90 % hemihydrate for building plaster, moulds and casting. There are 2 SKUs in the catalogue.
What is the minimum order for Gypsum, and how is it packed?
Containerised (FCL): 200 MT plaster; 1,000 MT raw rock; break-bulk vessel: 1,000 MT raw rock (contracts to 100,000 MT); plaster to 20,000 MT. Packing — Bulk vessel · 1 MT FIBC jumbo bags · 50 kg PP woven bags. Sold FOB (raw rock); FOB / CIF (plaster); CFR, DAP on request.
Which loading ports and lead times apply to Gypsum?
Loading ports are Damietta (EGDAM), Alexandria (EGALY), El Dekheila (EGEDK), Ain Sokhna (EGSOK). Lead time is 2–4 weeks from a confirmed order.
How is quality verified on a shipment of Gypsum?
At the port laboratory gate: Purity by combined water and SO₃, moisture, sieve analysis. Per-lot CoA (purity, combined water, SO₃, moisture, sizing) issued by the port laboratory before B/L; out-of-spec lots rejected at the loading port. An independent inspector can be appointed — SGS / TÜV Austria / Intertek: increment sampling per ISO 3082-style bulk protocol, draft survey, witness purity and moisture test.
Which standards and certifications apply to Gypsum?
EN 13279-1 / -2 (gypsum binders and plasters), ASTM C22 / C22M and C471M — referenced on every CoA; ISO 9001 supplier systems. HS code: 2520.10 raw gypsum · 2520.20 plasters.

Other questions? Email our export desk — the export desk replies to every request.

Send the specification and the tonnage.

Grade, packing, destination and quantity — the export desk comes back with a priced FOB / CIF / CFR offer for Gypsum once stock, laycan and freight are confirmed.

Request a Quote