Metals & AlloysSteel, aluminum, copper, zinc, lead, ferro-alloys and scrap metal.
Egyptian metals + alloys exporter — rebar, wire rod, HRC, CRC, aluminium ingot, copper cathode, ferro-alloys, scrap. Bulk container + breakbulk. FOB / CIF from 7 Egyptian ports.
Quality at the Core · since 2014
Institutional reliability in metals & alloys export.
Egypt Globe Group was incorporated with a dedicated Quality Assurance division at its nucleus. Specification is guaranteed at the port of loading and binding under the sales contract — the Certificate of Analysis the buyer’s own arrival laboratory reproduces, shipment after shipment.
Read the QA charter →Zero tolerance on specification deviation
A lot outside its Certificate of Analysis is rejected at the loading port — never re-graded, blended down or renegotiated.
Per-lot laboratory verification
Source and port laboratories test every lot against the contract specification before a Bill of Lading is issued.
Independent third-party inspection
TÜV Austria, SGS, Intertek or Bureau Veritas (ISO/IEC 17020 / 17025) sample and witness at any of seven Egyptian ports.
Laycan and grading discipline
Documented Notice of Readiness and Statement of Facts on every vessel; sieve, assay and moisture verified per lot.
Metals & Alloys — Egyptian mill steel and certified primary metals, every lot under an EN 10204 3.1 certificate
Egypt Globe Group supplies the full metals stack — finished steel, primary non-ferrous, ferro-alloys and scrap — combining domestic Egyptian production (long and flat steel from Egyptian mills, ferro-alloys via Egyptian smelters) with curated re-export of LME-brand primary metal and graded scrap from regional mills and recyclers. Rebar to BS 4449 B500B, structural coil to EN 10025-2 S235JR, cold-rolled DC01, galvanised DX51D, wire rod, billets and sections load from Alexandria and El Dekheila; ingot, cathode, ferro-alloys and scrap consolidate through Damietta and Ain Sokhna.
A metals buyer pays for a mechanical test and a chemistry, not for a product name. Yield, tensile and elongation decide whether a bar passes a structural engineer; Cu + Ag decides whether a cathode is LME Grade A; radiation screening decides whether a scrap cargo is discharged at all. The regional failure is lot-to-lot substitution behind a recycled mill certificate. Egypt Globe Group's internal Quality Assurance division has been at the nucleus of the group since incorporation in 2014 ("Quality at the Core"): every lot ships with a Mill Test Certificate to EN 10204 3.1 traceable to heat or coil, cross-checked by the port-side QC team before the Bill of Lading, with 3.2 certification witnessed by TÜV Austria, SGS, Intertek or Bureau Veritas on request. Lots outside the contractual specification are rejected at the loading port — never re-graded, never renegotiated.
Technical specification
Portfolio comparison — headline specification by sub-category
| Sub-category | Lines supplied | Headline specification (catalogue) | Standard |
|---|---|---|---|
| Steel products | Rebar B500B and Grade 60 · HRC S235JR / A36 · CRC DC01 · GI DX51D Z100–Z275 and G90 · wire rod SAE 1006-1018 · billets 3SP / 5SP · IPE / HE / UPN / angle sections | Rebar yield ≥ 500, tensile ≥ 540 N/mm², elongation ≥ 14 %; HRC yield ≥ 235, tensile 360–510 N/mm²; CRC yield 140–280 N/mm²; wire rod C 0.06–0.18 % | BS 4449:2005+A3:2016, ASTM A615, EN 10025-2, EN 10130, EN 10346, EN 10016 / ASTM A510, ASTM A653 |
| Aluminium | Primary ingot P1020A 99.7 % · extrusion 6063-T5 · calcined bauxite ≥ 85 % Al₂O₃ | Al ≥ 99.7 % (LME P1020A) | LME brand, AAMA (extrusions) |
| Copper | Cathode Grade A 99.99 % · wire rod 8 mm 99.9 % Cu | Cu ≥ 99.99 % cathode; ≥ 99.9 % rod | LME Grade A / EN 1978, IEC 60228 |
| Ferro-alloys | FeSi 75 lump 10–100 mm · HC FeMn Mn ≥ 74 % · HC FeCr Cr ≥ 60 % | Si 75 %; Mn ≥ 74 %; Cr ≥ 60 % | ISO 5445 / 5446 / 5448 |
| Zinc & lead | Zinc SHG ≥ 99.995 % · soft lead 99.97 % | Zn ≥ 99.995 %; Pb 99.97 % | LME SHG / EN 1179, EN 12659 |
| Scrap metal | HMS 1&2 80:20 · aluminium UBC baled | ISRI 200–206 mix; radiation-free certificate | ISRI specifications, Basel Annex IX |
Logistical & QA parameters (division)
| Parameter | Detail |
|---|---|
| MOQ — containerised (FCL) | 25 MT for ingot, cathode and ferro-alloy lines; 100 MT catalogue MOQ for most SKUs; 250–500 MT for Egyptian-mill flat and long steel |
| MOQ — break-bulk vessel | 1,000 MT scrap and billets; parcels to 20,000 MT (HRC, scrap) and 50,000 MT (billets, bauxite) |
| Packing | Bundles 1–2 MT · coils on pallet · loose break-bulk · 40 ft container; ingots strapped in bundles; scrap loose or baled |
| Loading ports | Alexandria (EGALY), El Dekheila (EGEDK), Damietta (EGDAM), Ain Sokhna (EGSOK); see each sub-category |
| Incoterms | FOB / CFR / CIF; DAP / DDP on request |
| Lead time | 2–4 weeks for stock and re-export lines; 4–6 weeks for Egyptian-mill rolling programmes |
| Independent inspection protocol | TÜV Austria, SGS, Intertek or Bureau Veritas: tally and dimensional check, witnessed tensile and spectrographic test for EN 10204 3.2, draft survey on bulk, radiation survey on scrap, sealed samples |
| Internal QA gate | MTC to EN 10204 3.1 per heat or coil, or LME brand certificate, verified by the port-side QC team before B/L; out-of-spec lots rejected at the loading port |
| HS codes | 72xx steel · 7601 / 7604 aluminium · 7403 / 7408 copper · 7202 ferro-alloys · 7901 / 7801 zinc and lead · 7204 / 7602 scrap |
QA verification chain
| Gate | Control | Evidence | Who · frequency |
|---|---|---|---|
| Mill / smelter | Heat chemistry by spectrometer; mechanical test per heat or coil; LME-registered brand for primary metal | Mill Test Certificate EN 10204 3.1, LME brand certificate | Producer lab · per heat or coil |
| Processing / yard | Bundling, tagging and heat-number traceability; scrap radiation survey and ISRI grading with photographs | Tag list, radiation report, photo record | EGG yard QC · per lot |
| Port laboratory | MTC reconciled to tags; dimensional and weight check; spectrographic re-check on sample bars or ingots | Per-lot CoA / MTC verification | EGG port QC · every lot before B/L |
| Independent inspection | Witnessed tensile and chemistry for EN 10204 3.2; tally; draft survey; radiation survey | TÜV Austria / SGS / Intertek / BV certificate | Per shipment |
| Destination acceptance | Buyer laboratory or mill re-test against MTC; referee sample on dispute | Buyer report vs MTC | Buyer · on arrival |
Applications & markets
- Reinforcement, structural and fabrication steel: construction, steel and metal
- Galvanising feed (SHG zinc), battery lead, copper for cable and electrical: industrial chemistry
- Repeat shipments to East and West Africa, the GCC and South Asia; see Kenya, Nigeria, Saudi Arabia and India import guides
Browse the full metals catalogue.
Standards & documentation
- EN 10204 (3.1 / 3.2 inspection documents), BS 4449, ASTM A615, EN 10025-2, EN 10130, EN 10346, EN 10016, LME contract specifications, ISRI scrap specifications
- ISO 9001:2015 across all divisions — quality and compliance; inspection services; documentation
- HS codes · Incoterms 2020 · vessel sizes · ports: Alexandria, El Dekheila
Request a quote
Send product, grade, sizes, quantity and destination port; the export desk replies within 24 hours with pricing, mill, lead time and a sample MTC. Request a quote — or request a metals quote — 24h response.
6 sub-categories — pick your commodity
Each sub-category carries its own specification window, certifications and tender language, and every SKU inside it ships on a per-lot Certificate of Analysis.
Scrap Metal — HMS 1&2 80:20 Ferrous Scrap & Baled Aluminium UBC, ISRI-graded, Radiation-screened
HMS 1&2 80:20 heavy melting scrap for EAF mills and baled UBC aluminium scrap, ISRI-graded with photographic record, radiation-free certificate and Basel Annex IX documents. FOB / CIF from Egyptian ports.
Aluminium — LME P1020A Ingot 99.7 %, 6063-T5 Extrusions & Calcined Bauxite Exporter
Primary aluminium ingot P1020A 99.7 % (LME brand), anodised / powder-coated 6063-T5 extrusions and calcined bauxite ≥ 85 % Al₂O₃ from Egyptian ports. Brand and OES verified per lot before B/L.
Copper — LME Grade A Cathode 99.99 % & 8 mm Wire Rod 99.9 % Cu Exporter, Egypt
Electrolytic copper cathode Grade A 99.99 % (LME brand) and 8 mm continuous-cast wire rod 99.9 % Cu to IEC 60228, shipped from Alexandria, Damietta and Ain Sokhna. Brand and OES verified per lot before B/L.
Ferro-alloys — FeSi 75, High-carbon FeMn & HC FeCr 60 % for Steelmaking via Egyptian Ports
Ferro-silicon 75 lump 10–100 mm, high-carbon ferro-manganese Mn ≥ 74 % and high-carbon ferro-chrome Cr ≥ 60 %, sampled per ISO 4552 with per-lot CoA before B/L. FOB / CIF from Egyptian ports.
Steel Products
Egypt Globe Group steel products — full catalogue of commercial-grade SKUs available for FOB / CIF / CFR export.
Zinc & Lead
Egypt Globe Group zinc & lead — full catalogue of commercial-grade SKUs available for FOB / CIF / CFR export.
1 application served from this division.
Each industry has its own specification window, certifications and tender language. Select one to see the SKUs matched to it.
Institutional reliability in Egyptian-origin metals & alloys.
Egyptian-origin, traceable
Direct producer relationships across Egypt — a short, audited supply chain with EUR.1 / PAFTA / COMESA Certificate of Origin on every shipment.
7-port loading, own teams
Damietta · Port Said East · Alexandria · El Dekheila · Ain Sokhna · Safaga · Al-Arish — closest-to-source routing with resident EGG stevedoring, agency and port-QC teams.
Per-lot QA before B/L
Port-laboratory analysis and Certificate of Analysis on every lot before the Bill of Lading; TÜV Austria / SGS / Intertek / Bureau Veritas pre-shipment inspection on request.
24-hour quote SLA
Submit an RFQ today, receive a priced FOB / CIF / CFR offer, sample CoA and inspection protocol tomorrow. Standardised L/C-bank document set on order.
Recently shipped from this division.
Rebar BS 4449 Grade B500B — Egyptian Mill
HRC — Hot-Rolled Coil S235JR
CRC — Cold-Rolled Coil DC01
Galvanised Steel Sheet — DX51D Z275
Steel Wire Rod SAE 1006-1018
Steel Sections — I-Beam / H-Beam / Angle
Aluminum Extrusion 6063-T5
Aluminum Scrap UBC Baled
Need a tender match or a custom specification?
Send the specification, tonnage and destination — a priced FOB / CIF / CFR offer with a sample Certificate of Analysis and the applicable inspection protocol comes back within 24 hours.
Request a Quote