Skip to main content
Egypt Globe Group
Application7 matching SKUs12 standards covered

Stone & Architecture

Egyptian granite, marble and decorative stone for flooring, wall cladding, vanity tops, terrazzo, monumental work and heritage restoration — Galala Cream, Sinai Pearl, Rosa Aswan, Sunny Yellow; EN 12058 / EN 1469 tested, inspection report per lot before B/L.

7
SKUs serving this industry
12
Standards & certs covered
7
Loading ports
60+
Destination markets

Stone & architecture

Granite, marble, decorative stone quarried in Egypt — Galala, Sinai pink, Triesta, New Halayeb, Aswan. Polished, honed, brushed and bush-hammered finishes available. Egypt Globe Group supplies Galala Cream, Sinai Pearl and Sunny Yellow marble, Rosa Aswan red granite and Crema Sahara limestone as blocks, slabs and calibrated tiles, with white Portland cement for terrazzo and GRC, to architects, fabricators and contractors worldwide.

Dimension stone is sold on a sample and delivered in containers months later; colour drift, hairline fissures or a slab batch below flexural strength cannot be corrected on site. The group's Quality Assurance division tests density, water absorption, compressive and flexural strength per lot to EN 12058 / EN 1469, grades every slab and crate against the approved sample, and issues the inspection report before the B/L — lots outside specification are rejected at the loading port, never re-graded.

Sub-applications served

Wall cladding & exterior facade
large-format slabs, dry-fix systems
Flooring & luxury flooring
slab, tile, terrazzo aggregate
Vanity tops & bathroom premium
fabricated countertops, vessel sinks
Architectural facades & entrances
pillars, archways, bespoke shapes
Monumental & sculpture
memorials, statuary, religious commissions
Heritage restoration
colour-matched replacements for historic stone
Hotel lobby & luxury residential
feature walls, fireplaces, statement pieces

Industry requirements

RequirementTypical tender specificationHow EGG verifies itEvidence issued
DensityMarble ≥ 2.60–2.65 g/cm³; granite ≥ 2.70 g/cm³EN 1936 per lotTest report
Water absorptionMarble ≤ 0.4–0.5 %; granite ≤ 0.2 %EN 13755 per lotTest report
Compressive strengthMarble ≥ 110–125 MPa; granite ≥ 180 MPaEN 1926 per lotTest report
Flexural strength≥ 10 MPa marble (Galala); ≥ 15 MPa granite (Rosa Aswan)EN 12372 per lotTest report
Abrasion resistanceClass A (Galala Cream flooring)EN 14157Test report
DimensionsSlabs 18 / 20 / 30 mm; calibrated tiles 30 × 60, 60 × 60, 60 × 120 cm; custom on requestCalliper check per crateInspection report
Finish and colourPolished / honed / brushed / sandblasted / flamed to approved range sampleVisual grading against retained sample, per slabGraded packing list with photos
Protection and packingSealed pre-shipment with epoxy + impregnator; crated in heat-treated ISPM 15 wooden cratesCrate inspection, pallet stamp checkPacking list, photos
White cement (terrazzo / GRC)Fe₂O₃ ≤ 0.5 %, whiteness ≥ 85 %, 28-day 42.5–62.5 MPaMTC per lotMTC + whiteness certificate

Matched supply

ProductGrade / spec headlineDivisionStandardMOQ
Galala Cream marble — Egyptian premiumDensity ≥ 2.65, absorption ≤ 0.4 %, compressive ≥ 120 MPa, flexural ≥ 10 MPa, abrasion Class AConstructionEN 12058 / EN 146910 MT
Sinai Pearl marble — beige premium · Sinai Pearl slabs 2 cmDensity ≥ 2.65, compressive ≥ 125 MPaConstructionEN 12058 / EN 146910–25 MT
Rosa Aswan granite — pink · Aswan red granite blocksDensity ≥ 2.70, absorption ≤ 0.2 %, compressive ≥ 180 MPa, Mohs 6–7ConstructionEN 12058 / EN 1469 / EN 1240710–100 MT
Sunny Yellow marble — Egyptian classicDensity ≥ 2.60, compressive ≥ 110 MPa — heritage restorationConstructionEN 12058 / EN 146910 MT
Crema Sahara limestone tiles · marble tiles Grade A · granite blocksCalibrated tiles and blocksConstructionEN 12407, CE25–100 MT
White Portland cement — decorative + architecturalWhiteness ≥ 85 %, Fe₂O₃ ≤ 0.5 % — terrazzo, GRC, tile groutConstructionEN 197-1 CEM I 42.5N white250 MT
Porcelain floor tiles 60 × 60 cm polishedISO 13006 BIa, Class AConstructionCE100 MT
Granite & marble catalogueBlocks, slabs, tilesConstructionEN 12058 / EN 146910 MT

Loading ports: Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK); blocks break-bulk from El Dekheila (EGEDK). Containerised (crated slabs and tiles) or break-bulk blocks; FOB / CFR / CIF / DAP. HS 2515.11 / 2516.11 / 6802.21 / 6802.92.

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Quarry

    Block selection against approved range sample; fissure and colour inspection

    EvidenceQuarry block register with photos

    EGG QA · every block

  2. 2

    Processing

    Sawing, calibration, finishing, sealing with epoxy + impregnator; slab-by-slab grading

    EvidenceFactory grading sheet

    EGG QA · every slab / crate

  3. 3

    Port laboratory

    Density, absorption, compressive / flexural strength, abrasion per lot; dimensional and crate check

    EvidenceInspection report + test report before B/L; off-spec lot rejected

    EGG port-side QC · every lot

  4. 4

    Independent inspection

    Crate opening, slab count, finish and colour verification against sample, ISPM 15 check

    EvidencePSI certificate

    SGS, TÜV Austria, Intertek, Bureau Veritas · on request

  5. 5

    Destination acceptance

    Buyer acceptance against graded packing list and sample; spec guaranteed at port of loading; voyage condition under B/L + marine insurance

    EvidenceBuyer acceptance

    Buyer · per shipment

Destination markets & compliance

Standards & documentation

Request a quote

State the stone, finish, thickness, format and quantity in m² or MT; the trade desk returns a range sample plan, test-report template and CIF price once stock, laycan and freight are confirmed. Request a quote

Matching SKUs

7 products for stone & architecture

Sourced from 2 of our 7 product divisions.

Custom blend? →

Standards & Certifications Covered

SKUs in this application carry paperwork ready for the standards below.

ISO 9001:2015EN 12058 (paving)EN 1469 (cladding)SGS verifiedEN 10130 DC01JIS G3141 SPCCMTC per coilEN 12058EN 1469EN 197-1:2011ASTM C150MTC + whiteness certificate per shipment

Other applications served

Frequently asked questions

What should a buyer in Stone & Architecture specify?
Density: Marble ≥ 2.60–2.65 g/cm³; granite ≥ 2.70 g/cm³; Water absorption: Marble ≤ 0.4–0.5 %; granite ≤ 0.2 %; Compressive strength: Marble ≥ 110–125 MPa; granite ≥ 180 MPa; Flexural strength ≥ 10 MPa marble (Galala); ≥ 15 MPa granite (Rosa Aswan). The requirements table on this page lists all 9 parameters.
Which products does Egypt Globe Group supply for Stone & Architecture?
8 matched lines: Galala Cream marble — Egyptian premium, Sinai Pearl marble — beige premium · Sinai Pearl slabs 2 cm, Rosa Aswan granite — pink · Aswan red granite blocks, Sunny Yellow marble — Egyptian classic, Crema Sahara limestone tiles · marble tiles Grade A · granite blocks and 3 more. Galala Cream marble — Egyptian premium runs Density ≥ 2.65, absorption ≤ 0.4 %, compressive ≥ 120 MPa, flexural ≥ 10 MPa, abrasion Class A.
How does Egypt Globe Group prove a lot meets the specification for Stone & Architecture?
Per-lot testing at the port laboratory: EN 1936 per lot; EN 13755 per lot; EN 1926 per lot; EN 12372 per lot. Evidence issued: Test report; Inspection report; Graded packing list with photos; Packing list, photos. The Certificate of Analysis is issued before the Bill of Lading; a lot outside its CoA is rejected at the loading port.
Which destination rules apply to shipments for Stone & Architecture?
EU / UK architects and fabricators — CE marking under EN 1469 / EN 12058, EUR.1; Italy · UK; GCC hospitality and luxury residential — SASO / SABER, PAFTA; Saudi Arabia; US premium residential — USA; China fabrication — China.
Which standards and certifications apply to Stone & Architecture?
EN 12058 (paving), EN 1469 (cladding), EN 12407 (petrographic), EN 1936 / EN 13755 / EN 1926 / EN 12372 test methods (plain-text references) · EN 197-1 for white cement.

Other questions? Email our export desk — the export desk replies to every request.

Have a stone & architecture requirement?

Tell us your tender spec — we'll come back with priced FOB / CIF / CFR options matched to your industry's standards.

Request a Quote