Skip to main content
Egypt Globe Group
Application21 matching SKUs12 standards covered

Water Treatment & Softening

Municipal RO, ion-exchange resin regeneration, water softener pellets, pool / spa water management — NSF/ANSI 60 salt at ≥ 99 % NaCl plus PAC, alum, hypochlorite and ferric chloride. Per-lot CoA before B/L.

21
SKUs serving this industry
12
Standards & certs covered
7
Loading ports
60+
Destination markets

Salt and chemicals for water treatment and softening

Municipal water treatment plants, ion-exchange resin regenerators, water-softener manufacturers and pool / spa operators need high-purity NaCl in tablet, pellet, crystal or coarse grain form, backed by the coagulants and disinfectants that run the rest of the plant. Egypt Globe Group ships water-treatment-grade Egyptian salt — vacuum-evaporated North Sinai / Red Sea sea salt and Siwa Oasis rock salt at ≥ 99 % NaCl, NSF/ANSI 60 certified — together with PAC, aluminium sulphate, sodium hypochlorite, ferric chloride and sodium bisulphite from its Chemicals division, to municipalities, industrial RO operators and consumer water-softener brands worldwide.

Softener resin and chlorinator cells are damaged by the contaminants a low-grade salt carries — hardness that re-fouls the bed, insolubles that bridge the brine tank, iron that stains. Lot-to-lot consistency is the whole value. The group's Quality Assurance division assays every lot at the port laboratory and issues the Certificate of Analysis before the B/L; an off-spec lot is rejected at the loading port, never re-graded.

Industry requirements

RequirementTypical tender specificationHow EGG verifies itEvidence issued
NaCl≥ 99.0–99.5 % (softener, RO, chlorinator); ≥ 97 % (industrial raw regeneration)Titration per lotCoA before B/L
HardnessCa + Mg ≤ 0.15 % combined (≤ 1,000 ppm softener grade) — will not re-foul softener resinICP / complexometric per lotCoA
Insolubles≤ 0.02–0.05 % pellet / crystal; ≤ 0.2–0.5 % industrialGravimetric per lotCoA
Moisture≤ 0.1–0.2 % pellets / crystal — keeps product free-flowingOven-drying per lotCoA
Form8–12 mm compacted pellets (cabinet softeners); 1–3 mm crystal (bulk regeneration); 3–5 mm coarse; fine crystal for industrial ROSieve / dimensional check per lotSieve report
AdditivesNo anti-caking, no iodine in drinking-water contact gradesProcess exclusion + assayDeclaration on CoA
Drinking-water certificationNSF/ANSI 60 (salt, PAC, alum, hypochlorite)Certificate held per SKUNSF/ANSI 60 listing
Coagulant / disinfectant assayPAC Al₂O₃ ≥ 30 %, basicity 40–50 %; alum Al₂O₃ ≥ 17 %, Fe ≤ 0.005 %; NaClO 12–15 % available Cl; FeCl₃ ≥ 40 %Titration / spectrophotometry per lotCoA

Matched supply

ProductGrade / spec headlineDivisionStandardMOQ
Water softener sea salt pellets — compacted 8–12 mmNaCl ≥ 99.50 %, Ca ≤ 0.05 %, Mg ≤ 0.02 %, insolubles ≤ 0.02 %Salt — seaNSF/ANSI 60240 MT
Ion-exchange crystal 1–3 mm — softener regenNaCl ≥ 99.30 %, insolubles ≤ 0.03 %Salt — seaNSF/ANSI 60240 MT
Water softening rock salt — tablets and pelletsNaCl ≥ 99.5 %, compressed, Siwa / QattaraSalt — rockISO 9001, SGS240 MT
Pool & aquaculture water treatment rock saltNaCl ≥ 99.5 %, ultra pureSalt — rockISO 9001, SGS240 MT
Pool rock salt — coarse 3–5 mmNaCl ≥ 99.00 %, Ca ≤ 0.10 %, Mg ≤ 0.05 %Salt — rockNSF/ANSI 60240 MT
Sea salt — industrial granular 0.5–3 mmNaCl ≥ 97.00 % — large industrial RO & ion-exchangeSalt — seaISO 9001240 MT
Rock salt — industrial coarse · extra coarseNaCl ≥ 97.00 %, insolubles ≤ 0.20 %Salt — rockISO 9001240 MT
PAC — polyaluminium chloride 30 %Al₂O₃ ≥ 30 %, basicity 40–50 %, insolubles ≤ 0.3 %ChemicalsNSF/ANSI 6025 MT
Aluminium sulphate 17 % Al₂O₃Fe ≤ 0.005 % iron-free gradeChemicalsNSF/ANSI 60, Egyptian Standard25 MT
Sodium hypochlorite 12–15 %12–15 % available chlorine, pH ≥ 12ChemicalsNSF/ANSI 6025 MT
Ferric chloride 40 % liquidFeCl₃ ≥ 40 %, free acid ≤ 0.5 %ChemicalsISO 9001, SGS25 MT
Sodium bisulphite 38 %NaHSO₃ ≥ 38 % — dechlorination, oxygen scavengerChemicalsIndustrial grade25 MT
Magnetite powder ≥ 95 % Fe₃O₄Density ≥ 4.9 g/cm³ — ballasted flocculation / filter mediaMineralsISO 9001, SGS250 MT
Pool & softener salt catalogue · water-treatment chemicalsSalt · ChemicalsNSF/ANSI 6025–240 MT

Loading ports: sea salt from Al-Arish (EGEAR), Port Said East (EGPSE), Damietta (EGDAM), Ain Sokhna (EGSOK); rock salt from El Dekheila (EGEDK), Alexandria (EGALY), Damietta, Ain Sokhna; chemicals from Alexandria, Damietta, Ain Sokhna. 25 kg / 50 kg bags, 1 MT FIBC, bulk, IBC; FOB / CFR / CIF. HS 2501.00.99.

QA verification chain

GateControlEvidenceWho · frequency
SourcePan-brine or mine-face assay — NaCl, Ca, Mg, insolubles; producer batch certificate for chemicalsSource lab reportEGG QA · every lot
ProcessingVacuum evaporation, compaction to pellet, screening; no additives; chemical filling and assayBatch record, dimensional checkEGG QA · every batch
Port laboratoryNaCl, hardness, insolubles, moisture, sieve per lot; coagulant / disinfectant assayCoA before B/L; out-of-spec lot rejectedEGG port-side QC · every lot
Independent inspectionSampling per ISO, container tally, witness assay, sealed retained samplesPSI certificateTÜV Austria, SGS, Intertek, Bureau Veritas · per shipment on request
Destination acceptanceUtility or brand laboratory check against CoA; spec guaranteed at port of loadingBuyer acceptanceBuyer · per shipment

Destination markets & compliance

  • European water-softener brands (Germany, UK, France) — EN 973 Type A, REACH, CE marking for EU + UK
  • Middle East municipal water plants (UAE, KSA) — SASO / SABER and PAFTA origin
  • Far East industrial RO operators (China, India) — BIS where required
  • Latin American spa / pool industry; East Africa utilities — KEBS PVoC (Kenya)
  • Related: water-treatment salt page · swimming pool · aquaculture

Standards & documentation

Request a quote

State the form (pellet, crystal, coarse), the certification required and the annual volume; the trade desk returns a matched SKU and CoA template within 24 hours. Request a quote or browse matching products → or request a quote.

Matching SKUs

21 products for water treatment & softening

Sourced from 4 of our 7 product divisions.

Custom blend? →

From Salt (13)

All salt

From Chemicals (5)

All chemicals

From Construction (2)

All construction

From Industrial Minerals (1)

All industrial minerals

Standards & Certifications Covered

SKUs in this application carry paperwork ready for the standards below.

ISO 9001:2015SGS verifiedNSF/ANSI 60 drinking waterNSF/ANSI 60Egyptian StandardASTM C150 Type VEN 197-1 SR3Egyptian ESMTC per shipmentEN 197-1:2011GOEICSGS

Other applications served

Have a water treatment & softening requirement?

Tell us your tender spec — we'll come back within 24 hours with priced FOB / CIF / CFR options matched to your industry's standards.

Request a Quote