Skip to main content
Egypt Globe Group
Salt4 SKUsHS 2501.00FOB · CIF · CFR

Bulk Pool & Water-Softener Salt — NSF/ANSI 60 Chlorinator Salt

NSF/ANSI 60 pool and water-softener salt — vacuum-evaporated sea salt and Siwa rock salt at ≥ 99 % NaCl, Ca + Mg ≤ 0.15 %, insolubles ≤ 0.05 %, no additives. Medium crystal, coarse, ion-exchange crystal and 8–12 mm compacted pellets. FOB / CFR / CIF from 240 MT.

4
SKUs in this line
240
MOQ, metric tonnes
6
Loading ports
2
Industries served
Salt · product line

Bulk Pool & Water-Softener Salt at a glance

Commercial and logistics terms across the 4 SKUs in this line. Each SKU page carries its own specification sheet and test methods; every lot is analysed before the Bill of Lading.

Bulk Pool & Water-Softener Salt — commercial reference

10 parameters
Products in this line
4 SKUs
HS codes
2501.00
Origin
Siwa Oasis · Qattara Depression · North Sinai (El-Arish · Bardawil) + Red Sea coast
Minimum order
240 MT
Lead time
2–3 weeks from confirmed order
Packing
1 MT FIBC jumbo bags · 25kg bags · 50 kg PP woven bags · Bulk vessel · 10kg bags · 1MT bags
Loading ports
Ain Sokhna · Damietta · Al-Arish · Port Said East · Alexandria · El Dekheila
Destination regions
Americas · Asia · Europe · Global
Standards & documents
NSF/ANSI 60 · GOEIC · ISO 9001 · ISO 9001:2015
Incoterms
FOB · CFR · CIF

Taken from the SKU records in this line. Grade-specific limits and test methods are on each SKU page.

Pool and water-softener salt — NSF/ANSI 60 sodium chloride for chlorinators and ion-exchange regeneration

Salt-chlorine generators and ion-exchange softeners both fail on the same impurities: calcium and magnesium scale the electrolytic cell or foul the resin, sulphate and insolubles build sludge in the brine tank, and iron stains. Pool-grade salt is therefore specified at ≥ 99 % NaCl with Ca + Mg held below 0.15 %, insolubles below 0.05 %, and no iodine or anti-caking additive. Egypt Globe Group supplies four SKUs certified to NSF/ANSI 60 for drinking-water treatment chemicals: vacuum-evaporated North Sinai / Red Sea sea salt as medium-grain pool salt, ion-exchange crystal and compacted softener pellets, and Siwa / Qattara rock salt as a coarse pool grade at ≥ 99 % NaCl with naturally low Ca and Mg.

Supply runs from 10 kg and 25 kg retail bags through 50 kg bags and 1 MT FIBC to bulk vessel, 240 MT containerised minimum, 2–3 weeks lead time. Distributors who have stocked inconsistent regional product know the consequence: a pallet that cakes in the warehouse or a lot that leaves a white ring in the cell. Egypt Globe Group's Quality Assurance division has operated since incorporation in 2014; specification is guaranteed at the port of loading and binding under the sales contract, and a lot outside its CoA is rejected at the port, never re-graded.

Technical specification

Pool & softener salt — Physical properties

ParameterPS-SEA-POOL-MPS-ROCK-POOL-CPS-SEA-WT-CRYSTALPS-SEA-WT-PELLETTest methodStandard
Source · processingSea, vacuum-evaporatedRock (Siwa / Qattara), naturalSea, vacuum-evaporatedSea, vacuum-evaporated, compacted
FormMedium crystalCoarse crystalIon-exchange crystalPillow-shaped pelletVisual
Particle size1.0–3.0 mm3.0–5.0 mm1.0–3.0 mm8–12 mmISO 13320 / sieveISO 13320
Bulk density1,150–1,350 kg/m³1,150–1,350 kg/m³1,100–1,300 kg/m³1,200–1,400 kg/m³EN 1097-3 (loose bulk density)
Moisture≤ 0.10 %≤ 1.5 % natural (≤ 0.25 %, ≤ 0.5 % or ≤ 1.0 % (winter) kiln-dried on request)≤ 0.20 %≤ 0.10 %Loss on drying
pH (10 % solution)7.0–8.07.0–8.06.8–7.87.0–8.0ISO 10523
ColourWhiteWhiteWhiteWhiteVisual
Shelf life36 months, sealed bags, dry warehouse36 months36 months36 months

Pool & softener salt — Chemical analysis

ParameterPS-SEA-POOL-MPS-ROCK-POOL-CPS-SEA-WT-CRYSTALPS-SEA-WT-PELLETTest methodQA sampling
NaCl (dry basis)≥ 99.00 %≥ 99.00 %≥ 99.30 %≥ 99.50 %ISO 2481 (halogens as Cl)Per shipment
Calcium (Ca)≤ 0.10 %≤ 0.10 %≤ 0.08 %≤ 0.05 %ICP / titrimetricPer shipment
Magnesium (Mg)≤ 0.05 %≤ 0.05 %≤ 0.03 %≤ 0.02 %ICPPer shipment
Sulphate (SO₄)≤ 0.20 %≤ 0.20 %≤ 0.15 %≤ 0.10 %TurbidimetricPer shipment
Water insolubles≤ 0.05 %≤ 0.05 %≤ 0.03 %≤ 0.02 %ISO 2479 (gravimetric)Per shipment
Iodine, anti-caking, additivesnonenonenonenoneDeclaration on CoAPer lot
Heavy metalswithin NSF/ANSI 60 contaminant limits for the product's maximum use levelas leftas leftas leftICP-MS, ISO 17294-2Per shipment

Pool & softener salt — Logistical & QA parameters

MOQ — containerised (FCL)
240 MT (10 × 20 ft FCL)
MOQ — break-bulk vessel
2,000 MT; parcels to 65,000 MT (crystal grades)
Packing
10 kg and 25 kg bags (pellets, crystal) · 25 kg / 50 kg PP woven bags · 1 MT FIBC · bulk vessel; palletised, ISPM 15, shrink-wrapped on request; private-label retail bags on request
Loading ports — sea salt grades
Al-Arish (EGAAC), Port Said East (EGPSE), Damietta (EGDAM), Ain Sokhna (EGSOK)
Loading ports — rock salt grade
El Dekheila (EGEDK), Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK)
Incoterms
FOB / CFR / CIF; DAP / DDP on request
Lead time
2–3 weeks
Independent inspection protocol
TÜV Austria (primary, EU / GCC), SGS, Intertek (US), Bureau Veritas — ISO/IEC 17020 + 17025. Composite sampling at bagging, witnessed NaCl / Ca / Mg / insolubles determination, pellet crush check, seal verification.
Internal QA gate
Per-lot CoA before B/L; NSF/ANSI 60 listing reference on the CoA; lot outside CoA rejected at the loading port
HS code
2501.00 (heading; national subheading per destination tariff)

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Extraction / source

    Controlled-pan brine (sea) or low-Ca / Mg halite seam (rock) selected on raw assay

    EvidenceSource lab log, lot number

    EGG QA division · every production lot

  2. 2

    Processing

    Vacuum evaporation, drying, screening; compaction and pellet hardness on PS-SEA-WT-PELLET; no additives

    EvidenceProcess record, hardness test

    EGG QA division · every lot

  3. 3

    Port laboratory

    NaCl, Ca, Mg, SO₄, insolubles, moisture, pH, sieve on the lot composite

    EvidencePer-lot CoA before B/L

    EGG port-side QC team · every lot

  4. 4

    Independent inspection

    Witnessed sampling and analysis, packing and seal verification

    EvidenceInspection certificate

    TÜV Austria / SGS / Intertek / Bureau Veritas · per shipment on instruction

  5. 5

    Destination acceptance

    Buyer reconciles to CoA; specification guaranteed at port of loading, voyage condition under B/L and marine insurance

    EvidenceBuyer test report

    Buyer · on receipt

Applications & markets

Standards & documentation

Bulk Pool & Water-Softener Salt by industry

2 industries served

Each industry page carries its own specification window, standards and the matching SKUs.

Salt

Other product lines in salt

Salt overview →

Frequently asked questions

What grades of Bulk Pool & Water-Softener Salt can I buy from Egypt?
Egypt Globe Group supplies four SKUs certified to NSF/ANSI 60 for drinking-water treatment chemicals: vacuum-evaporated North Sinai / Red Sea sea salt as medium-grain pool salt, ion-exchange crystal and compacted softener pellets, and Siwa / Qattara rock salt as a coarse pool grade at ≥ 99 % NaCl with naturally low Ca and Mg. There are 4 SKUs in the catalogue.
What is the minimum order quantity for Bulk Pool & Water-Softener Salt?
Containerised (FCL): 240 MT (10 × 20 ft FCL); break-bulk vessel: 2,000 MT; parcels to 65,000 MT (crystal grades). Packing — 10 kg and 25 kg bags (pellets, crystal) · 25 kg / 50 kg PP woven bags · 1 MT FIBC · bulk vessel; palletised, ISPM 15, shrink-wrapped on request. Sold FOB / CFR / CIF; DAP / DDP on request.
Which loading ports and lead times apply to Bulk Pool & Water-Softener Salt?
Sea salt grades loads from Al-Arish (EGAAC), Port Said East (EGPSE), Damietta (EGDAM), Ain Sokhna (EGSOK). Rock salt grade loads from El Dekheila (EGEDK), Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK). Lead time is 2–3 weeks from a confirmed order.
What testing does each lot of Bulk Pool & Water-Softener Salt pass before the Bill of Lading?
At the port laboratory gate: NaCl, Ca, Mg, SO₄, insolubles, moisture, pH, sieve on the lot composite. Per-lot CoA before B/L; NSF/ANSI 60 listing reference on the CoA; lot outside CoA rejected at the loading port. An independent inspector can be appointed — TÜV Austria (primary, EU / GCC), SGS, Intertek (US), Bureau Veritas — ISO/IEC 17020 + 17025. Composite sampling at bagging.
Which standards and export documents apply to Bulk Pool & Water-Softener Salt?
NSF/ANSI 60 (drinking-water treatment chemicals); ISO 9001 for salt suppliers. HS code: 2501.00 (heading; national subheading per destination tariff).

Other questions? Email our export desk — the export desk replies to every request.

Send the specification and the tonnage.

Grade, packing, destination and quantity — the export desk comes back with a priced FOB / CIF / CFR offer for Bulk Pool & Water-Softener Salt once stock, laycan and freight are confirmed.

Request a Quote