Skip to main content
Egypt Globe Group
Salt1 SKUHS 2501.00FOB · CIF · CFR

Bulk Aquaculture Salt — Hatchery & Fish-Farm Sea Salt

Hatchery-grade aquaculture sea salt — vacuum-evaporated North Sinai / Red Sea salt, NaCl ≥ 98.5 %, insolubles ≤ 0.10 %, no iodine or anti-caking, ICP-MS heavy-metal panel on every lot. 50 kg bags, FIBC or bulk from 240 MT, 2–3 weeks.

1
SKU in this line
240
MOQ, metric tonnes
4
Loading ports
1
Industry served
Salt · product line

Bulk Aquaculture Salt at a glance

Commercial and logistics terms across the 1 SKU in this line. Each SKU page carries its own specification sheet and test methods; every lot is analysed before the Bill of Lading.

Bulk Aquaculture Salt — commercial reference

10 parameters
Products in this line
1 SKU
HS codes
2501.00
Origin
North Sinai (El-Arish · Bardawil) + Red Sea coast
Minimum order
240 MT
Lead time
2–3 weeks from confirmed order
Packing
1 MT FIBC jumbo bags · 50 kg PP woven bags · Bulk vessel
Loading ports
Ain Sokhna · Al-Arish · Damietta · Port Said East
Destination regions
Asia · East Africa · MENA
Standards & documents
Halal
Incoterms
FOB · CFR · CIF

Taken from the SKU records in this line. Grade-specific limits and test methods are on each SKU page.

Aquaculture salt — hatchery-grade Egyptian sea salt with fish-health metal limits

Aquaculture salt is dosed into hatchery tanks, transport water and recirculating systems to hold salinity, reduce osmotic stress and control ectoparasites. The parameters that matter are not the ones on an industrial datasheet: heavy metals must sit well below fish-toxicity thresholds, the salt must dissolve clean with no insoluble haze, and it must carry no iodine, anti-caking agent or ferrocyanide. Egypt Globe Group supplies a dedicated hatchery-grade SKU, PS-SEA-AQUA-M, from North Sinai (El-Arish / Bardawil) and Red Sea (Ain Sokhna) sea salt, vacuum-evaporated to ≥ 98.5 % NaCl with the natural marine trace-ion balance retained, heavy-metal tested by ICP-MS on every lot. Siwa / Qattara rock salt pool and aquaculture cuts (≥ 97 % NaCl, low Ca / Mg) are listed in the bulk salt catalogue for brine make-up where sea-salt ionic profile is not required.

Supply is in 50 kg PP bags, 1 MT FIBC or bulk vessel, 240 MT containerised minimum, 2–3 weeks lead time, Halal certified. Hatcheries that have sourced from inconsistent regional exporters have seen the result of an unverified lot in a broodstock tank. Egypt Globe Group's Quality Assurance division has operated since incorporation in 2014; specification is guaranteed at the port of loading and binding under the sales contract, and a lot outside its CoA is rejected at the port, never re-graded or renegotiated.

Technical specification

Aquaculture sea salt — Physical properties

ParameterSpecificationTest methodStandard
Product code · sourcePS-SEA-AQUA-M · North Sinai / Red Sea sea salt, vacuum-evaporated
Appearance · colourWhite crystalline solidVisual / spectrophotometer
Grain · particle sizeMedium, 1.0–3.0 mmISO 13320 / test sieveISO 13320
Bulk density1,100–1,300 kg/m³EN 1097-3 (loose bulk density)
Moisture≤ 0.25 %Loss on drying
pH (10 % solution)7.5–8.5ISO 10523
DissolutionComplete, no visible insoluble residue at 30 g/LVisual, 20 °C
Shelf life · storage36 months; sealed bags, cool dry store

Aquaculture sea salt — Chemical analysis

ParameterLimitTest methodQA sampling
NaCl (dry basis)≥ 98.50 %ISO 2481 (halogens as Cl)Per shipment
Calcium (Ca)≤ 0.20 %ICP / titrimetricPer shipment
Magnesium (Mg)≤ 0.15 %ICPPer shipment
Sulphate (SO₄)≤ 0.40 %TurbidimetricPer shipment
Water insolubles≤ 0.10 %ISO 2479 (gravimetric)Per shipment
Lead / Arsenic / Cadmium / Mercurytested every lot by ICP-MS; reported against Codex STAN 150-1985 reference limits Pb ≤ 2.0, As ≤ 0.5, Cd ≤ 0.5, Hg ≤ 0.1 ppmICP-MS, ISO 17294-2Per shipment
Iodine, anti-caking (E535 / E536), additivesnone — declared absent on CoADeclarationPer lot

Aquaculture sea salt — Logistical & QA parameters

MOQ — containerised (FCL)
240 MT (10 × 20 ft FCL)
MOQ — break-bulk vessel
2,000 MT; parcels to 65,000 MT
Packing
50 kg PP woven bags with PE liner · 1 MT FIBC · bulk vessel; 25 kg bags on request; palletised, ISPM 15, shrink-wrapped
Loading ports
Al-Arish (EGAAC), Port Said East (EGPSE), Damietta (EGDAM), Ain Sokhna (EGSOK)
Incoterms
FOB / CFR / CIF; DAP / DDP on request
Lead time
2–3 weeks
Independent inspection protocol
TÜV Austria (primary, EU / GCC), SGS, Intertek, Bureau Veritas; Cotecna on request — ISO/IEC 17020 + 17025. Composite sampling at bagging, witnessed NaCl / insolubles / heavy-metal analysis, seal verification.
Internal QA gate
Per-lot CoA including ICP-MS heavy-metal panel before B/L; lot outside CoA rejected at the loading port
HS code
2501.00 (heading; national subheading per destination tariff)

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Extraction / source

    Controlled solar-pan harvest; raw brine and salt assay before allocation

    EvidenceSaltworks lab log, lot number

    EGG QA division · every production lot

  2. 2

    Processing

    Vacuum evaporation, drying, screening to 1–3 mm; no additives

    EvidenceProcess record

    EGG QA division · every lot

  3. 3

    Port laboratory

    NaCl, Ca, Mg, SO₄, insolubles, moisture, pH, heavy metals by ICP-MS

    EvidencePer-lot CoA before B/L

    EGG port-side QC team · every lot

  4. 4

    Independent inspection

    Witnessed sampling and analysis, packing and seal check

    EvidenceInspection certificate

    TÜV Austria / SGS / Intertek / Bureau Veritas · per shipment on instruction

  5. 5

    Destination acceptance

    Buyer reconciles to CoA; specification guaranteed at port of loading, voyage condition under B/L and marine insurance

    EvidenceBuyer test report

    Buyer · on receipt

Applications & markets

Standards & documentation

Salt

Other product lines in salt

Salt overview →

Frequently asked questions

What is in the Bulk Aquaculture Salt catalogue?
Egypt Globe Group supplies a dedicated hatchery-grade SKU, PS-SEA-AQUA-M, from North Sinai (El-Arish / Bardawil) and Red Sea (Ain Sokhna) sea salt, vacuum-evaporated to ≥ 98.5 % NaCl with the natural marine trace-ion balance retained, heavy-metal tested by ICP-MS on every lot. The catalogue lists 1 SKU: Aquaculture Sea Salt — Medium Grain.
What is the minimum order quantity for Bulk Aquaculture Salt?
Containerised (FCL): 240 MT (10 × 20 ft FCL); break-bulk vessel: 2,000 MT; parcels to 65,000 MT. Packing — 50 kg PP woven bags with PE liner · 1 MT FIBC · bulk vessel; 25 kg bags on request; palletised, ISPM 15, shrink-wrapped. Sold FOB / CFR / CIF; DAP / DDP on request.
Which loading ports and lead times apply to Bulk Aquaculture Salt?
Loading ports are Al-Arish (EGAAC), Port Said East (EGPSE), Damietta (EGDAM), Ain Sokhna (EGSOK). Lead time is 2–3 weeks from a confirmed order.
What testing does each lot of Bulk Aquaculture Salt pass before the Bill of Lading?
At the port laboratory gate: NaCl, Ca, Mg, SO₄, insolubles, moisture, pH, heavy metals by ICP-MS. Per-lot CoA including ICP-MS heavy-metal panel before B/L; lot outside CoA rejected at the loading port. An independent inspector can be appointed — TÜV Austria (primary, EU / GCC), SGS, Intertek, Bureau Veritas; Cotecna on request — ISO/IEC 17020 + 17025. Composite sampling at bagging.
Which specifications and shipping documents cover Bulk Aquaculture Salt?
Halal; ISO 9001:2015 across the division — ISO 9001 for salt suppliers. Commercial Invoice, Packing List, B/L, Certificate of Origin (EUR.1 / PAFTA / COMESA / AfCFTA), per-lot CoA. HS code: 2501.00 (heading; national subheading per destination tariff).

Other questions? Email our export desk — the export desk replies to every request.

Send the specification and the tonnage.

Grade, packing, destination and quantity — the export desk comes back with a priced FOB / CIF / CFR offer for Bulk Aquaculture Salt once stock, laycan and freight are confirmed.

Request a Quote