Skip to main content
Egypt Globe Group
Application14 matching SKUs12 standards covered

Oil & Gas Drilling

Drilling-mud weighting agent, completion fluids, EOR brines, workover salt — API 13B-1 spec salt plus API-grade barite, bentonite, magnetite and Class G oilwell cement. Per-lot CoA before B/L.

14
SKUs serving this industry
12
Standards & certs covered
7
Loading ports
60+
Destination markets

Salt and drilling consumables for oil & gas

Oil-field service companies, drilling-mud chemical formulators and EOR specialists use rock salt as a weighting agent in drilling muds, completion fluids, packer fluids and workover brines. Egypt Globe Group ships drilling-grade Egyptian salt — Siwa Oasis / Qattara Depression rock salt at ≥ 98 % NaCl and vacuum-evaporated North Sinai / Red Sea sea salt at ≥ 99 % — to oil-field service companies operating across MENA, Africa, the Caspian and the Gulf of Mexico basins, alongside API-grade barite, drilling bentonite, magnetite and API Spec 10A Class G oilwell cement from its Minerals and Construction divisions.

A mud engineer cannot tolerate a salt lot that dissolves slowly, carries insolubles into the shaker or brings iron to the casing. The group's Quality Assurance division assays every lot at the port laboratory and issues the Certificate of Analysis before the B/L; an off-spec lot is rejected at the loading port — never re-graded.

Industry requirements

RequirementTypical tender specificationHow EGG verifies itEvidence issued
NaCl≥ 97–98.5 % (rock); ≥ 99 % (sea, vacuum) — saturated brine density for completion fluidsTitration per lotCoA before B/L
API 13B-1 compatibilityDrilling-fluid testing compatibility declared per SKUBrine-density and filtrate check per lotCoA citing API 13B-1
Particle sizeFine 0.15–0.85 mm to coarse 1–5 mm per mud-engineer spec (faster dissolution at the rig site)Sieve per lotSieve report
Insolubles≤ 0.10–0.30 % — protects shakers and pumpsGravimetric per lotCoA
Iron content capLow-Fe source — prevents corrosion of casing + downhole toolsICP per lotCoA
Moisture≤ 1.0 % dried rock; ≤ 0.3 % vacuum seaOven-drying per lotCoA
Hardness / sulphateCa ≤ 0.10–0.20 %, Mg ≤ 0.05–0.15 %, SO₄ ≤ 0.2–0.4 %Wet chemistry per lotCoA
Weighting mineralsBarite SG ≥ 4.2 (API grade); magnetite Fe₃O₄ ≥ 95 %, density ≥ 4.9 g/cm³Pycnometer / XRF per lotAssay report
Oilwell cementAPI Spec 10A Class G HSR: C₃A ≤ 3.0 %, SO₃ ≤ 3.0 %, 8 h / 24 h strength at 60 °C ≥ 7 / ≥ 35 MPaMill Test Certificate per lotMTC before B/L

Matched supply

ProductGrade / spec headlineDivisionStandardMOQ
Rock salt — drilling mud medium 1–3 mmNaCl ≥ 98.50 %, insolubles ≤ 0.15 %, Ca ≤ 0.15 %, SO₄ ≤ 0.30 %Salt — rockAPI 13B-1, ISO 9001240 MT
Rock salt — workover brine coarse 3–5 mmNaCl ≥ 98.00 %, ≤ 1.00 % moistureSalt — rockISO 9001240 MT
Sea salt — drilling mud fine 0.3–1 mmNaCl ≥ 99.00 %, SO₄ ≤ 0.20 %, insolubles ≤ 0.10 %Salt — sea (vacuum)API 13B-1, REACH240 MT
Sea salt — industrial medium 1–3 mmNaCl ≥ 97.00 % — bulk rig-site dissolutionSalt — seaISO 9001240 MT
Rock salt — mine grade wholesale 5–50 mmNaCl ≥ 97.00 % — bulk supply for rig-site dissolutionSalt — rockISO 9001240 MT
Salt brine solution 26° BauméPre-dissolved, ready-to-use brine for completion fluidsSalt — rockISO 9001240 MT
Barite API grade 4.2 SGEastern Desert barite, SG 4.2MineralsAPI grade100 MT
Sodium bentonite — drilling gradeViscosifierMineralsISO 9001, SGS100 MT
Magnetite powder ≥ 95 % Fe₃O₄Density ≥ 4.9 g/cm³, drilling-fluid weightingMineralsISO 9001, SGS250 MT
Oilwell cement Class G — API Spec 10AHSR, C₃A ≤ 3.0 %, ≥ 35 MPa at 24 h / 60 °CConstructionAPI Spec 10A1,000 MT

Loading ports: rock salt from El Dekheila (EGEDK), Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK); sea salt from Al-Arish (EGEAR), Port Said East (EGPSE), Damietta, Ain Sokhna; Class G cement from Damietta, Ain Sokhna. Bagged (25 / 50 kg, 1 MT FIBC) or bulk vessel depending on rig logistics; FOB / CFR / CIF. HS 2501.00.99 / 2511.10 / 2523.29.

QA verification chain

GateControlEvidenceWho · frequency
SourceMine-face assay at Siwa / Qattara; pan-brine assay at North Sinai / Red Sea; quarry assay for barite / magnetiteSource lab reportEGG QA · every lot
ProcessingDrying, crushing, screening to mud-engineer sieve band; grinding for bariteSieve analysis, dryer logEGG QA · every batch
Port laboratoryNaCl, insolubles, Fe, hardness, moisture, sieve; SG / XRF for minerals; MTC for Class GCoA / MTC before B/L; off-spec lot rejectedEGG port-side QC · every lot
Independent inspectionSampling per ISO / API, draft survey or tally, witness testPSI certificateSGS, Intertek, TÜV Austria, Bureau Veritas · per shipment on request
Destination acceptanceMud-lab check against CoA; spec guaranteed at port of loadingBuyer acceptanceBuyer · per shipment

Destination markets & compliance

Standards & documentation

Request a quote

State the fluid system, sieve band, packaging and rig delivery point; a matched SKU with CoA template follows within 24 hours. Request a quote or browse matching products → or request a quote.

Matching SKUs

14 products for oil & gas drilling

Sourced from 5 of our 7 product divisions.

Custom blend? →

Standards & Certifications Covered

SKUs in this application carry paperwork ready for the standards below.

ISO 9001:2015SGS verifiedIntertek inspectedISO 22000:2018HACCPHalalBRC Food SafetyAflatoxin tested ≤4ppb (EU)API Spec 10A Class G HSRMTC per shipmentGOEICSGS

Other applications served

Have a oil & gas drilling requirement?

Tell us your tender spec — we'll come back within 24 hours with priced FOB / CIF / CFR options matched to your industry's standards.

Request a Quote