Skip to main content
Egypt Globe Group
Application

Bulk Salt for Oil & Gas — Drilling Mud, Workover Brine

Bulk Egyptian salt for upstream oil & gas — drilling mud salt (API 13B-1), workover brine salt, completion fluid weighting agent. Sea + rock salt variants, per-lot CoA before B/L.

01

Bulk salt for oil & gas — drilling mud, workover brine

Egyptian salt for upstream oilfield services — drilling mud weighting, workover brine systems, completion fluids. Siwa Oasis / Qattara Depression rock salt (≥ 98 % NaCl, dried to ≤ 1.0 % moisture) and vacuum-evaporated North Sinai / Red Sea sea salt (≥ 99 % NaCl) are screened to the mud engineer's sieve band and shipped with a port-laboratory Certificate of Analysis issued before the B/L.

Rig logistics do not allow a replacement lot: a consignment that cakes in the sack or carries insolubles into the active system is a lost day on the rig. Egypt Globe Group's Quality Assurance division controls every lot from mine or pan to port, and rejects at the loading port any lot outside the CoA — zero tolerance on specification deviation.

02

Specs

  • API 13B-1 compliant
  • Particle size customised per mud-engineer spec (fine 0.15-0.85 mm to coarse 1-3 mm)
  • Low moisture (≤1.0% rock variant) — easy mixing, no caking
  • Low chloride contamination (we're selling NaCl — not the contaminant)
03

Industry requirements

RequirementTypical tender specificationHow EGG verifies itEvidence issued
NaCl≥ 98.0–98.5 % rock; ≥ 99.0 % seaTitration per lotCoA before B/L
Particle size0.3–1 mm fine; 1–3 mm medium; 3–5 mm coarseSieve per lotSieve report
Moisture≤ 1.0 % (dried rock); ≤ 0.3 % (vacuum sea); ≤ 1.5 % natural rockOven-drying per lotCoA
Insolubles≤ 0.10–0.30 %Gravimetric per lotCoA
Ca / Mg / SO₄≤ 0.10–0.20 % / ≤ 0.05–0.15 % / ≤ 0.20–0.40 %Wet chemistry per lotCoA
IronLow-Fe source, reported on requestICPCoA
Packaging25 / 50 kg moisture-barrier bags, 1 MT FIBC, bulkPackaging inspectionPacking list, tally
04

Matched supply

ProductGrade / spec headlineDivisionStandardMOQ
Rock salt — drilling mud medium 1–3 mmNaCl ≥ 98.50 %, insolubles ≤ 0.15 %Salt — rockAPI 13B-1240 MT
Rock salt — workover brine coarse 3–5 mmNaCl ≥ 98.00 %, ≤ 1.00 % moistureSalt — rockISO 9001240 MT
Sea salt — drilling mud fine 0.3–1 mmNaCl ≥ 99.00 %, ≤ 0.30 % moistureSalt — sea (vacuum)API 13B-1, REACH240 MT
Salt brine solution 26° BauméSaturated NaCl brineSalt — rockISO 9001240 MT
Industrial grade catalogue17 rock and sea SKUsSaltISO 9001240 MT

Loading ports: rock from El Dekheila (EGEDK), Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK); sea from Al-Arish (EGEAR), Port Said East (EGPSE), Damietta, Ain Sokhna. FOB / CFR / CIF. HS 2501.00.99.

See oil & gas SKUs — filter for "Drilling Mud" / "Workover"

05

QA verification chain

GateControlEvidenceWho · frequency
SourceMine / pan assay — NaCl, insolubles, FeSource lab reportEGG QA · every lot
ProcessingDrying, screening to sieve band, moisture-barrier baggingSieve analysis, dryer logEGG QA · every batch
Port laboratoryNaCl, moisture, insolubles, hardness, sieve per lotCoA before B/L; off-spec lot rejectedEGG port QC · every lot
Independent inspectionSampling per ISO / API, tally, witness testPSI certificateSGS, Intertek, TÜV Austria, Bureau Veritas · on request
Destination acceptanceMud-lab check against CoA; spec guaranteed at port of loadingBuyer acceptanceBuyer · per shipment
06

Destination markets & compliance

24-hour SLA

Ready for a quote?

FOB / CIF / CFR pricing from 7 Egyptian ports — turnaround within 24 hours.

Request Quote

More in Application

Frequently asked questions

How do I request a quote?
Use the RFQ form at /rfq, or email [email protected] directly. We respond within 24 hours.
Where are your products sourced from?
Domestic Egyptian production wherever capacity exists — covering salt (Siwa, Qattara, North Sinai, Red Sea), cement, fertilizers, agro, minerals — plus curated re-export partnerships for commodities that aren't Egyptian-origin.

Other questions? Email our export desk — we respond within 24 hours.