Skip to main content
Egypt Globe Group
Application

Bulk Salt for Leather Tanning

Bulk Egyptian rock salt for leather tanning — hide preservation, salt-curing, brine-curing. Medium-grain dried rock salt, low Fe + Cu, LWG-compatible chain of custody, per-lot CoA before B/L.

01

Bulk salt for leather tanning — hide preservation

Leather tanneries worldwide use Egyptian rock salt for hide preservation (salting / brining) before chrome or vegetable tanning. Egypt Globe Group supplies a dedicated medium-grain dried rock salt from the Siwa Oasis and Qattara Depression mines — NaCl ≥ 97.5 %, ≤ 1.0 % moisture, 1–3 mm — and a coarse wholesale tanning grade, with a per-lot Certificate of Analysis issued at the port laboratory before the B/L.

In hide curing the salt is in contact with the raw material for weeks; iron or copper contamination appears as rust staining on the finished leather long after the salt invoice is paid. The group's Quality Assurance division assays Fe and Cu on every lot and rejects at the loading port any lot outside the CoA — never re-graded.

Why Egyptian rock salt?

Medium-grain dried
penetrates evenly without packing
Low Fe + Cu
no rust staining on leather
LWG-compatible
chain of custody (Leather Working Group sustainability standard)
Bulk shipping
to Pakistan, India, Bangladesh, Italy, Turkey, Brazil
02

Industry requirements

RequirementTypical tender specificationHow EGG verifies itEvidence issued
NaCl≥ 96–97.5 %Titration per lotCoA before B/L
Moisture≤ 1.0 % driedOven-drying per lotCoA
Grain sizeMedium 1–3 mm (even penetration); coarse on requestSieve per lotSieve report
Iron / copperLow-Fe, low-Cu source — no rust stainingICP per lotCoA
Ca / Mg / SO₄≤ 0.25 % / ≤ 0.15 % / ≤ 0.40 %Wet chemistry per lotCoA
Insolubles≤ 0.20 %Gravimetric per lotCoA
Chain of custodyLWG-compatible traceability from mine to bagLot genealogyLWG compatibility letter
03

Matched supply

ProductGrade / spec headlineDivisionStandardMOQ
Rock salt — leather tanning medium grainNaCl ≥ 97.50 %, ≤ 1.00 % moisture, 1–3 mm, insolubles ≤ 0.20 %Salt — rockISO 9001, GOEIC, LWG Compatible240 MT
Rock salt — leather tanning wholesaleNaCl ≥ 96 %, coarseSalt — rockISO 9001, SGS240 MT
Rock salt — industrial coarse 3–5 mmNaCl ≥ 97.00 % — brine-curing make-upSalt — rockISO 9001240 MT
Industrial grade catalogue17 SKUsSaltISO 9001240 MT

Loading ports: El Dekheila (EGEDK), Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK). 50 kg PP bags, 1 MT FIBC, bulk vessel 2,000–65,000 MT; FOB / CFR / CIF. HS 2501.00.

See leather-tanning SKUs — filter for "Leather Tanning"

04

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Extraction

    Mine-face assay at Siwa / Qattara — NaCl, Fe, Cu, insolubles

    EvidenceMine lab report

    EGG QA on-site lab · every lot

  2. 2

    Processing

    Drying to ≤ 1.0 %, screening to 1–3 mm

    EvidenceDryer log, sieve analysis

    EGG QA · every batch

  3. 3

    Port laboratory

    NaCl, moisture, Fe, Cu, sieve, insolubles per lot

    EvidenceCoA before B/L; off-spec lot rejected

    EGG port QC · every lot

  4. 4

    Independent inspection

    Sampling, draft survey or tally, witness Fe / Cu test

    EvidencePSI certificate

    SGS, Intertek, TÜV Austria, Bureau Veritas · on request

  5. 5

    Destination acceptance

    Tannery check against CoA; spec guaranteed at port of loading

    EvidenceBuyer acceptance

    Buyer · per shipment

Priced offers

Ready for a quote?

FOB / CIF / CFR pricing from 7 Egyptian ports — turnaround once stock, laycan and freight are confirmed.

Request Quote

More in Application

Frequently asked questions

What should a buyer of salt for leather tanning specify?
NaCl ≥ 96–97.5 %; Moisture ≤ 1.0 % dried; Grain size: Medium 1–3 mm (even penetration); coarse on request; Iron / copper: Low-Fe, low-Cu source — no rust staining. The requirements table lists all 7 parameters.
What is offered for salt for leather tanning?
4 matched entries: Rock salt — leather tanning medium grain, Rock salt — leather tanning wholesale, Rock salt — industrial coarse 3–5 mm, Industrial grade catalogue.
What testing does salt for leather tanning pass before loading?
At the port laboratory gate: NaCl, moisture, Fe, Cu, sieve, insolubles per lot — CoA before B/L; off-spec lot rejected. An independent inspector can be appointed — Sampling, draft survey or tally, witness Fe / Cu test.
Which destination rules apply to salt for leather tanning?
Pakistan, India, Bangladesh — BIS where applicable; India · Bangladesh; Italy, Turkey — REACH, EUR.1 / Egypt–Turkey FTA; Italy · Turkey; Brazil — Egypt–MERCOSUR preferential origin; Brazil.

Other questions? Email our export desk — the export desk replies to every request.