Skip to main content
Egypt Globe Group
Application11 matching SKUs11 standards covered

Pulp, Paper & Textile

Paper-grade cellulose, dye fixation, fabric bleaching, textile dyeing — wet-process raw materials for the pulp, paper and textile industries: low-SO₄ salt, caustic soda, hypochlorite, PAC, alum, bisulphite, pulp chips, OCC, kraft liner, cotton and polyester fibre. CoA per lot before B/L.

11
SKUs serving this industry
11
Standards & certs covered
7
Loading ports
60+
Destination markets

Pulp, paper & textile

Wet-process raw materials and process consumables for the pulp, paper, and textile industries — bleaching agents, dye fixers, mordants, sizing salts. Egypt Globe Group supplies the salt side from its own North Sinai / Red Sea saltworks and Siwa Oasis mines, and the chemical, fibre and pulp side — caustic soda, sodium hypochlorite, PAC, alum, ferric chloride, sodium bisulphite, eucalyptus pulp chips, OCC, kraft liner, Egyptian cotton and polyester staple — through its Chemicals, Construction and Agro divisions, each lot with a Certificate of Analysis or inspection certificate issued before the B/L.

Paper machines and dye-houses run continuously; an off-spec lot of bleach or fixing salt is discovered in the product, not the warehouse. The group's Quality Assurance division, in place since 2014, tests every lot at the port laboratory and rejects any lot outside the CoA at the loading port — never re-graded.

Sub-applications served

Pulp bleaching
sodium chloride for chlorine dioxide generation
Paper sizing
alum, sodium sulphate for paper machines
Textile dyeing & fixation
Glauber salt, sodium chloride for reactive dye exhaust dyeing
Industrial bleaching
chlorine-based fabric bleaches
Dye industry
mordants, salt-based developers
Leather tanning
salt-cured hides preservation

Industry requirements

RequirementTypical tender specificationHow EGG verifies itEvidence issued
Dyeing saltNaCl ≥ 99 %, Fe ≤ 5 ppm, SO₄ ≤ 0.05–0.20 %, 0.3–1 mmICP + gravimetric per lotCoA before B/L
Bleaching / causticNaClO 12–15 % available Cl; NaOH 98 % flakes; NaHSO₃ ≥ 38 %Iodometric / titration per lotCoA
Sizing / coagulationAlum Al₂O₃ ≥ 17 %, Fe ≤ 0.005 %; PAC Al₂O₃ ≥ 30 %Titration per lotCoA
Pulp feedstockEucalyptus E. globulus chips pulp grade, FSC / PEFC, phytosanitary; OCC ISRI grade 11 moisture ≤ 12 %, prohibitives ≤ 1 %; kraft liner 125 gsm FSCMoisture, prohibitives, grammage per lotInspection certificate
FibreEgyptian ELS cotton (Giza 45), Ne30 carded yarn, polyester staple 1.4D, rPET flakesGrade and staple verification per lotInspection certificate
RegulatoryREACH, OEKO-TEX 100 (dyeing salt), SDSCertificate per SKUCertificate copies

Matched supply

ProductGrade / spec headlineDivisionStandardMOQ
Sea salt — textile dyeing low-SO₄ fineNaCl ≥ 99.00 %, SO₄ ≤ 0.05 %SaltOEKO-TEX 100, REACH240 MT
Rock salt — textile & dyeing low ironNaCl ≥ 99 %, Fe < 5 ppmSaltISO 9001, SGS240 MT
Rock salt — leather tanning medium grainNaCl ≥ 97.50 %, 1–3 mm, LWG compatibleSaltISO 9001240 MT
Caustic soda flakes 98 % · soda ash dense 99.2 %NaOH 98 %; Na₂CO₃ 99.2 %ChemicalsEU REACH, SGS100 MT
Sodium hypochlorite 12–15 % · sodium bisulphite 38 %Bleaching / dechlorinationChemicalsNSF/ANSI 60; industrial25 MT
PAC 30 % · aluminium sulphate 17 % · ferric chloride 40 %Paper-machine retention and sizingChemicalsNSF/ANSI 6025 MT
Eucalyptus wood chips — pulp gradeFSC / PEFC, phytosanitary certifiedConstructionISO 9001, SGS100 MT
OCC 11 old corrugated containers · kraft liner 125 gsmISRI grade 11; FSC virgin linerConstructionISO 9001, SGS100 MT
Egyptian Giza 45 ELS cotton · cotton yarn Ne30Extra-long staple; carded ring-spunAgroISO 9001, SGS100 MT
Polyester staple fibre 1.4D · rPET flakesRegular; recycledMineralsISO 9001, SGS100 MT
Industrial salt catalogue · water-treatment chemicals · cotton · paper & cardboard25–240 MT

Loading ports: salt from Al-Arish (EGAAC), Port Said East (EGPSE), Damietta (EGDAM), Ain Sokhna (EGSOK) / El Dekheila (EGEDK), Alexandria (EGALY); chemicals from Alexandria, Damietta, Ain Sokhna; pulp, paper and fibre from Damietta, Alexandria, El Dekheila, Ain Sokhna, Port Said. Bulk vessel, 1 MT FIBC, 50 kg PP, IBC; FOB / CFR / CIF.

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Source

    Pan / mine assay (salt); producer batch certificate (chemicals); mill or ginnery lot record (pulp, paper, fibre)

    EvidenceSource report

    EGG QA · every lot

  2. 2

    Processing

    Vacuum evaporation, screening; filling; baling and moisture control

    EvidenceBatch record

    EGG QA · every batch

  3. 3

    Port laboratory

    Salt assay (NaCl, Fe, SO₄); chemical assay; moisture / prohibitives / grammage / staple check

    EvidenceCoA or inspection certificate before B/L; off-spec lot rejected

    EGG port-side QC · every lot

  4. 4

    Independent inspection

    Sampling, tally, witness assay, bale inspection

    EvidencePSI certificate

    SGS, Intertek, TÜV Austria, Bureau Veritas · on request

  5. 5

    Destination acceptance

    Mill laboratory check against CoA; spec guaranteed at port of loading

    EvidenceBuyer acceptance

    Buyer · per shipment

Destination markets & compliance

Standards & documentation

Request a quote

State the process, the material list and monthly volumes; the trade desk returns a consolidated offer with CoA templates once stock, laycan and freight are confirmed. Request a quote

Matching SKUs

11 products for pulp, paper & textile

Sourced from 2 of our 7 product divisions.

Custom blend? →

Standards & Certifications Covered

SKUs in this application carry paperwork ready for the standards below.

ISO 9001:2015NSF/ANSI 60 drinking waterSGS verifiedNSF/ANSI 60Egyptian StandardGOEICSGSISO 9001OEKO-TEX 100REACHLWG Compatible

Other applications served

Frequently asked questions

What should a buyer in Pulp, Paper & Textile specify?
Dyeing salt: NaCl ≥ 99 %, Fe ≤ 5 ppm, SO₄ ≤ 0.05–0.20 %, 0.3–1 mm; Bleaching / caustic: NaClO 12–15 % available Cl; NaOH 98 % flakes; NaHSO₃ ≥ 38 %; Sizing / coagulation: Alum Al₂O₃ ≥ 17 %, Fe ≤ 0.005 %; PAC Al₂O₃ ≥ 30 %; Pulp feedstock: Eucalyptus E. globulus chips pulp grade, FSC / PEFC, phytosanitary. The requirements table on this page lists all 6 parameters.
Which products does Egypt Globe Group supply for Pulp, Paper & Textile?
11 matched lines: Sea salt — textile dyeing low-SO₄ fine, Rock salt — textile & dyeing low iron, Rock salt — leather tanning medium grain, Caustic soda flakes 98 % · soda ash dense 99.2 %, Sodium hypochlorite 12–15 % · sodium bisulphite 38 % and 6 more. Sea salt — textile dyeing low-SO₄ fine runs NaCl ≥ 99.00 %, SO₄ ≤ 0.05 %.
How does Egypt Globe Group prove a lot meets the specification for Pulp, Paper & Textile?
Per-lot testing at the port laboratory: ICP + gravimetric per lot; Iodometric / titration per lot; Titration per lot; Moisture, prohibitives, grammage per lot. Evidence issued: CoA before B/L; CoA; Inspection certificate; Certificate copies. The Certificate of Analysis is issued before the Bill of Lading; a lot outside its CoA is rejected at the loading port.
Where does Egypt Globe Group export supply for Pulp, Paper & Textile?
South and South-East Asian textile clusters (Bangladesh, Pakistan, Vietnam, Indonesia) — Bangladesh · Vietnam; Turkey and EU paper and textile mills — REACH, FSC / PEFC, EUR.1 / FTA origin; Turkey · Italy; GCC and North Africa — SASO / SABER, PAFTA; East Africa — KEBS PVoC.
Which standards and certifications apply to Pulp, Paper & Textile?
Low-iron sodium chloride (Fe ≤ 5 ppm) for textile dyeing; sodium sulphate ≥ 99 % for kraft mills on request; OEKO-TEX 100; FSC / PEFC; ISRI grades. ISO 9001:2015 · documentation (Phytosanitary for wood chips) · inspection · quality & compliance.

Other questions? Email our export desk — the export desk replies to every request.

Have a pulp, paper & textile requirement?

Tell us your tender spec — we'll come back with priced FOB / CIF / CFR options matched to your industry's standards.

Request a Quote