Aluminium — LME P1020A Ingot 99.7 %, 6063-T5 Extrusions & Calcined Bauxite Exporter
Primary aluminium ingot P1020A 99.7 % (LME brand), anodised / powder-coated 6063-T5 extrusions and calcined bauxite ≥ 85 % Al₂O₃ from Egyptian ports. Brand and OES verified per lot before B/L.
3 products ready for export
Aluminium — LME-brand P1020A ingot 99.7 %, 6063-T5 architectural extrusions and calcined bauxite feedstock
Aluminium is traded on a brand and a chemistry: a primary ingot is accepted if it carries an LME-registered brand and assays ≥ 99.7 % Al; an extrusion is accepted on alloy, temper and surface finish. Egypt Globe Group supplies the line end to end — calcined bauxite as the refractory and alumina feedstock, primary ingot from GCC and Russian smelters, and finished 6063-T5 extrusions from Egyptian and UAE presses — for window and façade fabricators, die-casters and secondary smelters in the Mediterranean, East Africa, the Gulf, South Asia and the Far East.
The catalogue lines are Aluminum Ingots P1020A (primary, 99.7 %, LME specification, supplied with LME approved-brand documentation and mill certificate), Aluminum Extrusion 6063-T5 (anodised or powder-coated architectural profiles, AAMA-certified coatings) and Bauxite Ore Calcined 85 % Al₂O₃ (Guinea / Indonesia origin, SGS analysis). The regional failure is off-brand or remelt ingot sold as primary. Egypt Globe Group's QA division, built in since incorporation, verifies brand marking and spectrographic chemistry on every lot at the port before the Bill of Lading; a lot that does not match its certificate is rejected at the loading port.
Technical specification
Aluminum Ingots P1020A — Chemical analysis
| Parameter | Limit | Test method | QA sampling |
|---|---|---|---|
| Al | ≥ 99.70 % | Optical emission spectrometry | Port lab, per lot; LME brand certificate per heat |
| Si | ≤ 0.10 % | OES | Port lab, per lot |
| Fe | ≤ 0.20 % | OES | Port lab, per lot |
Aluminum Extrusion 6063-T5 — Physical and chemical summary
| Parameter | Specification | Test method | Standard |
|---|---|---|---|
| Alloy / temper | 6063-T5 | OES / hardness | ASTM B221 / EN 755-2 |
| Tensile strength | ≥ 150 MPa | Tensile test | ASTM B221 |
| Yield strength | ≥ 110 MPa | Tensile test | ASTM B221 |
| Chemistry | Si 0.20–0.60 %, Mg 0.45–0.90 %, Fe ≤ 0.35 % | OES | EN 573-3 |
| Finish | Anodised or powder-coated per AAMA 2603 / 2604 / 2605 | Thickness, adhesion, gloss | AAMA |
Calcined bauxite (Al₂O₃ ≥ 85 %, XRF per EN ISO 12677) is specified in full on the minerals bauxite page.
Logistical & QA parameters (all lines)
| Parameter | Detail |
|---|---|
| MOQ — containerised (FCL) | 25 MT ingot (maximum 1,000 MT); 5 MT extrusions (maximum 200 MT); 100 MT catalogue MOQ |
| MOQ — break-bulk vessel | 2,000 MT calcined bauxite (maximum 50,000 MT); ingot bulk parcels on request |
| Packing | Bundles / coils (strapped ingot bundles; profiles wrapped and bundled) · Containerised · Break-bulk |
| Loading ports | Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK) |
| Incoterms | FOB / CIF (ingot); CIF / DAP (extrusions); FOB / CFR (bauxite) |
| Lead time | 2–4 weeks |
| Independent inspection protocol | TÜV Austria / SGS / Intertek: tally and weighing, brand verification, witnessed OES, coating tests on profiles; SGS analysis for bauxite |
| Internal QA gate | LME brand certificate and mill certificate reconciled to bundle tags; port-lab OES check before B/L; out-of-spec lots rejected at the loading port |
| HS code | 7601.10 ingot · 7604.29 extrusions · 2606.00 bauxite |
QA verification chain
| Gate | Control | Evidence | Who · frequency |
|---|---|---|---|
| Smelter / press | Heat chemistry by OES; LME-registered brand stamping; temper and coating control on extrusions | Mill certificate, LME brand certificate | Producer lab · per heat |
| Yard | Bundle tagging and weighing; profile packing against order drawing | Tag list, packing list | EGG yard QC · per lot |
| Port laboratory | Brand and certificate reconciled; OES spot check; coating thickness on profiles | CoA / certificate verification | EGG port QC · every lot before B/L |
| Independent inspection | Tally, weighing, witnessed OES, coating tests | TÜV Austria / SGS / Intertek certificate | Per shipment |
| Destination acceptance | Smelter, die-caster or fabricator re-test against certificate | Buyer report vs certificate | Buyer · on arrival |
Applications & markets
- Architectural windows, doors and façades; die-casting and remelt feed: construction, steel and metal
- Refractory and abrasive feedstock (calcined bauxite): industrial chemistry
- Markets: Mediterranean, East Africa, Gulf, South Asia, Far East — see Saudi Arabia, Kenya and India import guides
Standards & documentation
- LME contract specification P1020A, EN 573-3, ASTM B221 / EN 755-2, AAMA 2603 / 2604 / 2605, EN ISO 12677 (bauxite)
- Inspection · documentation · quality and compliance · HS codes
Request a quote
State product, alloy or grade, quantity and destination; the export desk replies within 24 hours with brand, pricing, lead time and a sample certificate. Request a quote, or request a quote for a mixed enquiry.
Other sub-categories in Metals & Alloys
Browse related products across metals & alloys.
Scrap Metal — HMS 1&2 80:20 Ferrous Scrap & Baled Aluminium UBC, ISRI-graded, Radiation-screened
Copper — LME Grade A Cathode 99.99 % & 8 mm Wire Rod 99.9 % Cu Exporter, Egypt
Ferro-alloys — FeSi 75, High-carbon FeMn & HC FeCr 60 % for Steelmaking via Egyptian Ports
Steel Products
Zinc & Lead
Need a tender match for aluminium — lme p1020a ingot 99.7 %, 6063-t5 extrusions & calcined bauxite exporter?
Send the specification, tonnage and destination — a priced FOB / CIF / CFR offer with a sample Certificate of Analysis and inspection protocol comes back within 24 hours.
Request a Quote