Skip to main content
Egypt Globe Group
Industrial Minerals3 SKUsHS 2529.10FOB · CIF · CFR

Egyptian Potash Feldspar — Ceramic-grade Lumps K₂O+Na₂O ≥ 11 % & 200 Mesh Powder

Eastern Desert potash feldspar for ceramics and glass: lumps with K₂O + Na₂O ≥ 11 % and Fe₂O₃ ≤ 0.15 %, 200-mesh powder, K-spar 60 % grade. XRF per lot, FOB / CIF from four Egyptian ports.

3
SKUs in this line
100
MOQ, metric tonnes
4
Loading ports
Industrial Minerals · product line

Potash Feldspar at a glance

Commercial and logistics terms across the 3 SKUs in this line. Each SKU page carries its own specification sheet and test methods; every lot is analysed before the Bill of Lading.

Potash Feldspar — commercial reference

10 parameters
Products in this line
3 SKUs
HS codes
2529.10
Origin
Eastern Desert, Egypt
Minimum order
100 MT
Lead time
2–4 weeks from confirmed order
Packing
1 MT FIBC · 25 kg PP bags · Bulk vessel
Loading ports
Ain Sokhna · Alexandria · Damietta · El Dekheila
Destination regions
East Africa · Far East · Mediterranean · Red Sea & Gulf · South Asia
Standards & documents
ISO 9001:2015 · SGS
Incoterms
FOB · CFR · CIF

Taken from the SKU records in this line. Grade-specific limits and test methods are on each SKU page.

Feldspar — potash feldspar from the Eastern Desert for glass and ceramic bodies

Feldspar is the flux of the ceramic and glass industries: its alkali oxides (K₂O, Na₂O) lower the melting point of the silica body, and its iron content decides whether the fired tile or glass is white or stained. A ceramic buyer therefore specifies two numbers above all — total alkalis and Fe₂O₃ — and a supplier who cannot hold them lot-to-lot forces the kiln to re-formulate every delivery. Egypt's Eastern Desert pegmatites yield a potash-rich feldspar suited to sanitaryware, floor tile and glass batches.

Egypt Globe Group supplies three lines from Eastern Desert sources: Feldspar Powder K-spar 60 %, Feldspar Powder 200 Mesh ground for sanitaryware and floor tile, and Feldspar Lumps Ceramic Grade with K₂O + Na₂O ≥ 11 % and Fe₂O₃ ≤ 0.15 %. Alkalis and iron are assayed by XRF at the port laboratory on every lot and the CoA issued before the B/L; a lot with iron above the contracted ceiling is rejected at the loading port — the group's operating model since 2014, Quality at the Core.

Technical specification

Feldspar Lumps Ceramic Grade — Physical properties

ParameterSpecificationTest methodStandard
FormHand-sorted lump, Eastern Desert potash feldsparVisual
Lump sizeReported on CoA; graded per contractISO 3310 sieveISO 3310
MoistureReported on CoAOven dryingPort lab

Feldspar Lumps Ceramic Grade — Chemical analysis

ParameterLimitTest methodQA sampling
K₂O + Na₂O≥ 11 %XRF, EN ISO 12677Port lab, per lot
Fe₂O₃≤ 0.15 %XRF, EN ISO 12677Port lab, per lot
SiO₂, Al₂O₃, CaO, TiO₂Reported on CoAXRFPort lab, per lot
Loss on ignitionReported on CoAGravimetric, 1,000 °CPort lab, per lot

Feldspar Powder K-spar 60 % and Feldspar Powder 200 Mesh — Physical and chemical summary

ParameterSpecificationTest methodStandard
Potash feldspar contentK-spar 60 % (powder grade)XRD / normative calculationCatalogue grade
Particle size200 mesh (75 µm) for the 200-mesh grade; residue reportedWet sieve, ISO 3310ISO 3310
K₂O + Na₂O, Fe₂O₃Reported on CoA per lotXRF, EN ISO 12677Port lab
MoistureReported on CoAOven dryingPort lab

Logistical & QA parameters (all grades)

MOQ — containerised (FCL)
100 MT catalogue MOQ; 200 MT minimum order for 200-mesh powder (maximum 20,000 MT)
MOQ — break-bulk vessel
500 MT for ceramic-grade lumps; up to 30,000 MT per shipment
Packing
Bulk vessel · 1 MT FIBC · 25 kg PP bags
Loading ports
Damietta (EGDAM), Alexandria (EGALY), El Dekheila (EGEDK), Ain Sokhna (EGSOK)
Incoterms
FOB / CIF for powder; FOB for lumps; CFR on request
Lead time
2–4 weeks
Independent inspection protocol
Bureau Veritas (BV certificate specified for 200-mesh grade), SGS or TÜV Austria: increment sampling per ISO 11648-2, witnessed XRF, draft survey on bulk parcels, sealed referee sample
Internal QA gate
Per-lot CoA (alkalis, Fe₂O₃, sizing, moisture) by the port laboratory before B/L; out-of-spec lots rejected at the loading port
HS code
2529.10

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Extraction / source

    Pegmatite face sampling; iron-stained and mica-rich zones rejected at hand-sorting

    EvidenceQuarry assay log

    EGG QA · per working face

  2. 2

    Processing

    Crushing, magnetic separation, grinding to 200 mesh; mill residue control

    EvidenceMill sieve and magnetic-separator log

    Plant QC · per shift

  3. 3

    Port laboratory

    XRF alkalis and Fe₂O₃, LOI, sizing, moisture on lot composite; test-fire on request

    EvidencePer-lot CoA

    EGG port QC · every lot before B/L

  4. 4

    Independent inspection

    ISO 11648-2 sampling, witnessed XRF, draft survey

    EvidenceBV / SGS / TÜV certificate

    Per shipment

  5. 5

    Destination acceptance

    Ceramic or glass plant laboratory retest and trial firing

    EvidenceBuyer report vs CoA

    Buyer · on arrival

Applications & markets

Standards & documentation

Industrial Minerals

Other product lines in industrial minerals

Industrial Minerals overview →

Frequently asked questions

What grades of Potash Feldspar can I buy from Egypt?
Egypt Globe Group supplies three lines from Eastern Desert sources: Feldspar Powder K-spar 60 %, Feldspar Powder 200 Mesh ground for sanitaryware and floor tile, and Feldspar Lumps Ceramic Grade with K₂O + Na₂O ≥ 11 % and Fe₂O₃ ≤ 0.15 %. There are 3 SKUs in the catalogue.
What is the minimum order for Potash Feldspar, and how is it packed?
Containerised (FCL): 100 MT catalogue MOQ; 200 MT minimum order for 200-mesh powder (maximum 20,000 MT); break-bulk vessel: 500 MT for ceramic-grade lumps; up to 30,000 MT per shipment. Packing — Bulk vessel · 1 MT FIBC · 25 kg PP bags. Sold FOB / CIF for powder; FOB for lumps; CFR on request.
Which loading ports and lead times apply to Potash Feldspar?
Loading ports are Damietta (EGDAM), Alexandria (EGALY), El Dekheila (EGEDK), Ain Sokhna (EGSOK). Lead time is 2–4 weeks from a confirmed order.
What quality checks does a lot of Potash Feldspar pass before loading?
At the port laboratory gate: XRF alkalis and Fe₂O₃, LOI, sizing, moisture on lot composite; test-fire on request. Per-lot CoA (alkalis, Fe₂O₃, sizing, moisture) by the port laboratory before B/L; out-of-spec lots rejected at the loading port. An independent inspector can be appointed — Bureau Veritas (BV certificate specified for 200-mesh grade), SGS or TÜV Austria: increment sampling per ISO 11648-2, witnessed XRF, draft survey on bulk parcels.
Which standards and export documents apply to Potash Feldspar?
EN ISO 12677 (XRF analysis of ceramic raw materials), ISO 3310 (test sieves), ISO 11648-2 (sampling). HS code: 2529.10.

Other questions? Email our export desk — the export desk replies to every request.

Send the specification and the tonnage.

Grade, packing, destination and quantity — the export desk comes back with a priced FOB / CIF / CFR offer for Potash Feldspar once stock, laycan and freight are confirmed.

Request a Quote