Skip to main content
Egypt Globe Group
Industrial Minerals1 SKUHS 2602.00FOB · CIF · CFR

Manganese Ore 44 % Mn — Lump Ore for Ferro-manganese Smelting via Egyptian Ports

Manganese ore lump 44 % Mn (South Africa / Ghana origin) re-exported through Egyptian ports for FeMn / SiMn smelting. ISO 4296 sampling, SGS draft survey, per-lot CoA before B/L, FOB / CFR.

1
SKU in this line
100
MOQ, metric tonnes
4
Loading ports
Industrial Minerals · product line

Manganese Ore 44 % Mn at a glance

Commercial and logistics terms across the 1 SKU in this line. Each SKU page carries its own specification sheet and test methods; every lot is analysed before the Bill of Lading.

Manganese Ore 44 % Mn — commercial reference

10 parameters
Products in this line
1 SKU
HS codes
2602.00
Origin
South Africa · Ghana
Minimum order
100 MT
Lead time
2–4 weeks from confirmed order
Packing
1 MT FIBC · 25 kg PP bags · Bulk vessel
Loading ports
Ain Sokhna · Alexandria · Damietta · El Dekheila
Destination regions
East Africa · Far East · Mediterranean · Red Sea & Gulf · South Asia
Standards & documents
ISO 9001:2015 · SGS
Incoterms
FOB · CFR · CIF

Taken from the SKU records in this line. Grade-specific limits and test methods are on each SKU page.

Manganese — 44 % Mn lump ore for ferro-manganese smelting, sampled to ISO 4296 and draft-surveyed

Manganese ore is the feedstock of ferro-manganese and silico-manganese, the alloys every steelmaker uses to deoxidise and desulphurise the melt. A smelter buys ore on manganese content first, then on the ratio of manganese to iron, on phosphorus (which reports straight to the alloy) and on lump size (fines blind the furnace). Egypt Globe Group operates this line as a re-export of South African and Ghanaian lump ore, consolidated through Egyptian deep-water ports for ferro-alloy plants in the Mediterranean, Gulf, South Asia and Far East.

The catalogue line is Manganese Ore 44 % Mn, a lump ore for FeMn smelting. Manganese is a trade in which grade substitution — a 40 % cargo sold against a 44 % certificate — is the classic regional failure. Egypt Globe Group's QA division, built in since incorporation, accepts inbound cargo only against the origin certificate plus its own arrival composite, and the port laboratory issues a per-lot CoA before the Bill of Lading. A lot below the contracted Mn or above the phosphorus ceiling is rejected at the loading port, not re-priced.

Technical specification

Manganese Ore 44 % Mn — Physical properties

ParameterSpecificationTest methodStandard
FormLump oreVisual
SizeLump 10–75 mm typical; fines below 10 mm reported on CoAISO 3310 sieveISO 3310
MoistureReported on CoAISO 4299ISO 4299
Bulk densityReported on CoALoose-fill methodPort lab

Manganese Ore 44 % Mn — Chemical analysis

ParameterLimitTest methodQA sampling
Mn44 % (dry basis)ISO 4298 potentiometric / XRFPort lab, per lot
FeReported on CoA; Mn/Fe ratio statedISO 4297 series / XRFPort lab, per lot
Phosphorus≤ 0.10 %ISO 4297 series / XRFPort lab, per lot
SiO₂, Al₂O₃Reported on CoAXRFPort lab, per lot
Loss on ignitionReported on CoAGravimetricPort lab, per lot

Logistical & QA parameters

MOQ — containerised (FCL)
100 MT catalogue MOQ in 1 MT FIBC or 25 kg PP bags
MOQ — break-bulk vessel
5,000 MT minimum order; up to 100,000 MT per shipment
Packing
Bulk vessel · 1 MT FIBC · 25 kg PP bags
Loading ports
Damietta (EGDAM), Alexandria (EGALY), El Dekheila (EGEDK), Ain Sokhna (EGSOK)
Incoterms
FOB / CFR; CIF on request
Lead time
2–4 weeks
Independent inspection protocol
SGS (SGS analysis specified on the catalogue row) or Bureau Veritas: draft survey, increment sampling per ISO 4296-1 / -2, moisture per ISO 4299, witnessed Mn assay, sealed referee sample
Internal QA gate
Per-lot CoA (Mn, Fe, P, SiO₂, moisture, sizing) by the port laboratory before B/L; out-of-spec lots rejected at the loading port
HS code
2602.00

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Source

    Origin-mine CoA reviewed; EGG arrival composite assayed before acceptance into stock

    EvidenceOrigin CoA, arrival assay

    EGG QA · per cargo

  2. 2

    Stockpile

    Grades segregated; no blending across contracts; fines generation monitored

    EvidenceStockpile register

    Port operations · per stockpile

  3. 3

    Port laboratory

    Mn, Fe, P, SiO₂, moisture, sizing on lot composite

    EvidencePer-lot CoA

    EGG port QC · every lot before B/L

  4. 4

    Independent inspection

    ISO 4296 sampling, ISO 4299 moisture, draft survey, witnessed assay

    EvidenceSGS / BV certificate, weight certificate

    Per shipment

  5. 5

    Destination acceptance

    Smelter laboratory on discharge sample; umpire analysis on dispute

    EvidenceBuyer report vs CoA

    Buyer · on arrival

Applications & markets

Standards & documentation

Industrial Minerals

Other product lines in industrial minerals

Industrial Minerals overview →

Frequently asked questions

What grades of Manganese Ore can I buy from Egypt?
Manganese ore is the feedstock of ferro-manganese and silico-manganese, the alloys every steelmaker uses to deoxidise and desulphurise the melt. A smelter buys ore on manganese content first, then on the ratio of manganese to iron, on phosphorus (which reports straight to the alloy) and on lump size (fines blind the furnace). The catalogue lists 1 SKU: Manganese Ore 44% Mn.
What is the minimum order quantity for Manganese Ore?
Containerised (FCL): 100 MT catalogue MOQ in 1 MT FIBC or 25 kg PP bags; break-bulk vessel: 5,000 MT minimum order; up to 100,000 MT per shipment. Packing — Bulk vessel · 1 MT FIBC · 25 kg PP bags. Sold FOB / CFR; CIF on request.
Which Egyptian ports handle Manganese Ore, and how long is the lead time?
Loading ports are Damietta (EGDAM), Alexandria (EGALY), El Dekheila (EGEDK), Ain Sokhna (EGSOK). Lead time is 2–4 weeks from a confirmed order.
How is quality verified on a shipment of Manganese Ore?
At the port laboratory gate: Mn, Fe, P, SiO₂, moisture, sizing on lot composite. Per-lot CoA (Mn, Fe, P, SiO₂, moisture, sizing) by the port laboratory before B/L; out-of-spec lots rejected at the loading port. An independent inspector can be appointed — SGS (SGS analysis specified on the catalogue row) or Bureau Veritas: draft survey, increment sampling per ISO 4296-1 / -2, moisture per ISO 4299, witnessed Mn assay.
Which standards and certifications apply to Manganese Ore?
ISO 4296-1 / -2 (sampling), ISO 4299 (moisture), ISO 4298 (manganese content), ISO 4297 series (chemical analysis). HS code: 2602.00.

Other questions? Email our export desk — the export desk replies to every request.

Send the specification and the tonnage.

Grade, packing, destination and quantity — the export desk comes back with a priced FOB / CIF / CFR offer for Manganese Ore 44 % Mn once stock, laycan and freight are confirmed.

Request a Quote