Textiles & Yarn
Egypt Globe Group textiles & yarn — full catalogue of commercial-grade SKUs available for FOB / CIF / CFR export.
Textiles & Yarn at a glance
Commercial and logistics terms across the 2 SKUs in this line. Each SKU page carries its own specification sheet and test methods; every lot is analysed before the Bill of Lading.
Textiles & Yarn — commercial reference
- Products in this line
- 2 SKUs
- HS codes
- 3907.69 · 5503.20
- Origin
- China · Taiwan · India · Turkey · Egypt
- Minimum order
- 100 MT
- Lead time
- 2–4 weeks from confirmed order
- Packing
- 40-ft FCL · Bales 220 kg · Pallets
- Loading ports
- Ain Sokhna · Alexandria · Damietta · El Dekheila
- Destination regions
- East Africa · Far East · Mediterranean · Red Sea & Gulf · South Asia
- Standards & documents
- ISO 9001:2015 · SGS
- Incoterms
- FOB · CFR · CIF
Taken from the SKU records in this line. Grade-specific limits and test methods are on each SKU page.
2 products ready for export
Textiles & Yarn — polyester staple fibre 1.4D × 38 mm and GRS-certified rPET flakes, with Egyptian cotton yarn on request
The textiles line sits alongside the minerals division because it is traded the same way: containerised, on a datasheet, against a certificate. Polyester staple fibre is specified on linear density, cut length and tenacity; recycled PET flake on intrinsic viscosity, moisture and contamination, because IV and water decide whether the flake can be re-spun or only down-cycled. Egypt Globe Group supplies virgin PSF from Chinese, Taiwanese and Indian producers and rPET flake from Chinese, Turkish and Egyptian recyclers, and quotes Egyptian cotton yarn and viscose staple on request.
The catalogue lines are Polyester Staple Fiber 1.4D Regular, a virgin 1.4 denier × 38 mm regular-tenacity fibre for nonwovens and spinning, and Recycled Polyester rPET Flakes, clean washed flake with IV 0.72–0.78 and moisture ≤ 0.3 %, supplied with GRS and RCS certification. Substitution of off-grade or mixed-IV flake is the recurring regional problem. Egypt Globe Group's QA division, built in since incorporation, tests IV and moisture on every export lot and issues the CoA before the B/L; a lot outside the contracted IV band is rejected at the loading port.
Technical specification
Polyester Staple Fiber 1.4D Regular — Physical properties
| Parameter | Specification | Test method | Standard |
|---|---|---|---|
| Linear density | 1.4 denier (1.56 dtex) | ISO 1973 | ISO 1973 |
| Cut length | 38 mm | ISO 6989 | ISO 6989 |
| Tenacity | Regular tenacity, value reported on CoA | ISO 5079 | ISO 5079 |
| Elongation at break | Reported on CoA | ISO 5079 | ISO 5079 |
| Origin / polymer | Virgin PET; China / Taiwan / India | Material data sheet | — |
Recycled Polyester rPET Flakes — Physical and chemical analysis
| Parameter | Limit | Test method | QA sampling |
|---|---|---|---|
| Intrinsic viscosity | 0.72–0.78 dl/g | ASTM D4603 / ISO 1628-5 | Port lab, per lot |
| Moisture | ≤ 0.3 % | Karl Fischer / oven | Port lab, per lot |
| Flake size | Reported on CoA | Sieve | Port lab, per lot |
| PVC, metal, paper and label contamination | Reported on CoA against contract | Hand-sort / density separation | Port lab, per lot |
| Recycled content | Certified | GRS / RCS transaction certificate | Per shipment |
Logistical & QA parameters (both lines)
- MOQ — containerised (FCL)
- 100 MT catalogue MOQ; 20 MT minimum order per datasheet (maximum 500 MT)
- MOQ — break-bulk vessel
- Not applicable; containerised only (40 ft FCL)
- Packing
- Bales 220 kg · Pallets · 40 ft FCL
- Loading ports
- Damietta (EGDAM), Alexandria (EGALY), El Dekheila (EGEDK), Ain Sokhna (EGSOK)
- Incoterms
- CIF / DAP; FOB / CFR on request
- Lead time
- 2–4 weeks
- Independent inspection protocol
- SGS / Intertek / TÜV Austria: container stuffing supervision and bale count, sampling per bale plan, witnessed IV and moisture test, sealed referee sample; GRS / RCS chain-of-custody check
- Internal QA gate
- Per-lot CoA (denier and cut length or IV and moisture, contamination) by the port laboratory before B/L; out-of-spec lots rejected at the loading port
- HS code
- 5503.20 (polyester staple fibre) · 3907.69 (rPET flakes)
QA verification chain
-
1
Source
Producer or recycler datasheet and GRS / RCS scope certificate reviewed; EGG arrival sample tested
EvidenceMaterial data sheet, arrival test
EGG QA · per inbound lot
-
2
Processing / handling
Bales kept dry and palletised; flake stored sealed to hold moisture ≤ 0.3 %
EvidenceWarehouse log
Warehouse QC · per lot
-
3
Port laboratory
Denier, cut length, tenacity or IV, moisture, contamination on lot composite
EvidencePer-lot CoA
EGG port QC · every lot before B/L
-
4
Independent inspection
Stuffing supervision, bale count, witnessed test
EvidenceSGS / Intertek / TÜV certificate
Per shipment
-
5
Destination acceptance
Spinner, nonwoven line or extruder retest against CoA
EvidenceBuyer report vs CoA
Buyer · on arrival
Applications & markets
- Nonwovens, fibrefill, spinning and blending: pulp and textile
- rPET for fibre, sheet and strapping extrusion: industrial chemistry
- Markets: Mediterranean, East Africa, Gulf, South Asia, Far East — see Turkey, Bangladesh and Kenya import guides
Standards & documentation
- ISO 1973, ISO 6989, ISO 5079 (fibre), ASTM D4603 / ISO 1628-5 (intrinsic viscosity), Global Recycled Standard and Recycled Claim Standard (rPET)
- Inspection · documentation · quality and compliance · packing · HS codes
Other product lines in industrial minerals
Frequently asked questions
What is in the Textiles & Yarn catalogue?
What is the minimum order for Textiles & Yarn, and how is it packed?
Which loading ports and lead times apply to Textiles & Yarn?
What testing does each lot of Textiles & Yarn pass before the Bill of Lading?
Which standards and export documents apply to Textiles & Yarn?
Other questions? Email our export desk — the export desk replies to every request.
Send the specification and the tonnage.
Grade, packing, destination and quantity — the export desk comes back with a priced FOB / CIF / CFR offer for Textiles & Yarn once stock, laycan and freight are confirmed.
Request a Quote