Chemicals7 SKUsHS 2806FOB · CIF · CFR

Industrial Chemicals

Egyptian industrial chemicals — caustic soda flakes 98 % and liquid 48–50 %, soda ash dense 99.2 %, sulphuric acid 98 %, hydrochloric acid 35 %, sodium hypochlorite 12 %, calcium carbonate 98 %. Per-lot port-lab CoA, SGS inspection, FOB / CIF from Alexandria, Damietta, Ain Sokhna.

Get Quote Browse 7 SKUs →

SKUs in this line

100

MOQ, metric tonnes

Loading ports

Chemicals · product line

Industrial Chemicals at a glance

Commercial and logistics terms across the 7 SKUs in this line. Each SKU page carries its own specification sheet and test methods; every lot is analysed before the Bill of Lading.

Industrial Chemicals — commercial reference

10 parameters

Products in this line: 7 SKUs
HS codes: 2806 · 2807 · 2815 · 2828 · 2836
Origin: Suez, Egypt · China · EU · USA · Turkey
Minimum order: 100 MT
Lead time: 2–4 weeks from confirmed order
Packing: Drums · IBC 1000 L · ISO tank container · Tank truck
Loading ports: Ain Sokhna · Alexandria · Damietta
Destination regions: East Africa · Far East · Mediterranean · Red Sea & Gulf · South Asia
Standards & documents: EU REACH · MSDS · SGS
Incoterms: FOB · CFR · CIF

Taken from the SKU records in this line. Grade-specific limits and test methods are on each SKU page.

Industrial Chemicals catalogue

7 products ready for export

Quote any combination →

HS 2836.50

Industrial chemicals — chlor-alkali, soda ash and mineral acids with a per-lot CoA

Egypt's chlor-alkali industry converts Egyptian salt into caustic soda, chlorine and hydrochloric acid at membrane-cell plants on the Mediterranean and Red Sea coasts, and its sulphuric-acid capacity sits alongside the phosphate complexes. Egypt Globe Group supplies this production — caustic soda flakes 98 % (membrane grade) and liquid 48–50 %, soda ash dense 99.2 % (light on request), sulphuric acid 98 %, hydrochloric acid 33–35 %, sodium hypochlorite 12 % and ground calcium carbonate 98 % from Suez — and adds re-export from China, Turkey, the EU and the USA when volume or grade requires it. Sodium sulphate (Na₂SO₄ ≥ 99 %) is supplied on request.

The lot-to-lot problem in this category is assay drift: caustic flakes whose carbonate rises in storage, soda ash that picks up moisture and chloride, acid with iron above a catalyst limit. Egypt Globe Group's Quality Assurance division — at the nucleus of the group since incorporation in 2014 — re-samples every lot at the loading port, runs the ASTM assay in the port laboratory and issues the CoA before the B/L. Lots outside specification are rejected at the port, never re-graded or renegotiated.

Technical specification

Catalogue — comparison across grades

SKU	Product	Guaranteed assay	Form	UN / class	Origin	HS code
EGG-CHM-006	Caustic soda flakes 98 % (membrane)	NaOH ≥ 98 %	White flakes, 25 kg bags	UN 1823, class 8	Egypt / China / USA	2815.11
EGG-CHM-001	Caustic soda — solid and liquid	NaOH 98 % solid; 48–50 % solution	Flakes or solution	UN 1823 / 1824	Egypt	2815.12
EGG-CHM-007	Soda ash dense 99.2 %	Na₂CO₃ ≥ 99.2 %	Dense white granules	Not regulated	Egypt / China / Turkey	2836.20
EGG-CHM-005	Sulphuric acid technical 98 %	H₂SO₄ 98 %	Clear oily liquid	UN 1830, class 8	Egypt / EU	2807.00
EGG-CHM-004	Hydrochloric acid technical 35 %	HCl 33–35 %	Clear to pale-yellow liquid	UN 1789, class 8	Egypt / China	2806.10
EGG-CHM-003	Sodium hypochlorite 12 %	12 % available chlorine	Pale-yellow liquid	UN 1791, class 8	Egypt	2828.90
EGG-CHM-002	Calcium carbonate 98 %	CaCO₃ 98 %	Ground white powder	Not regulated	Egypt (Suez)	2836.50

Caustic soda flakes 98 % — Chemical analysis

Parameter	Limit	Test method	QA sampling
NaOH	≥ 98.0 %	ASTM E291 (titrimetric)	Per lot
Na₂CO₃	≤ 1.0 %	ASTM E291	Per lot
NaCl	≤ 0.05 % (membrane grade)	ASTM E291	Per lot
Fe	≤ 10 ppm	ASTM E291	Per lot

Soda ash dense 99.2 % — Chemical analysis

Parameter	Limit	Test method	QA sampling
Na₂CO₃ (total alkalinity)	≥ 99.2 %	ASTM E359	Per lot
NaCl	≤ 0.5 %	ASTM E359	Per lot
Fe	≤ 50 ppm	ASTM E359	Per lot
Bulk density	1.0–1.1 g/cm³ dense; 0.5–0.6 light	EN 1236	Per lot

Sulphuric acid 98 % — Chemical analysis

Parameter	Limit	Test method	QA sampling
H₂SO₄	98.0 % min	ASTM E223 (titrimetric)	Per lot
Fe	≤ 50 ppm	ASTM E223	Per lot
Residue on ignition	≤ 0.02 %	ASTM E223	Per lot
Density at 20 °C	1.83–1.84 g/cm³	ASTM D1298	Per lot

Hydrochloric acid is assayed to ASTM E224 (HCl 33–35 %, Fe ≤ 10 ppm); hypochlorite to AWWA B300; calcium carbonate by titrimetric CaCO₃ and 45 µm residue.

Industrial chemicals — Logistical & QA parameters

MOQ — containerised (FCL): 20–25 MT (one ISO tank or 20' FCL of bagged solids); hypochlorite 10 MT; per-SKU minimum 50–100 MT for acids, flakes and soda ash
MOQ — break-bulk / parcel tanker: 100 MT; maximum parcels 2,000 MT HCl, 5,000 MT sulphuric acid, 10,000 MT flakes or soda ash
Packing: ISO tank · tank truck · IBC 1,000 L · drums (liquids) · 25 kg PE-lined bags and 1 MT FIBC (solids)
Loading ports: Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK)
Incoterms: FOB / CFR / CIF; DAP / DDP and EXW on request
Lead time: 2–4 weeks
Independent inspection protocol: SGS (TÜV Austria for EU / GCC, Intertek on request): sampling per ASTM D4057 (liquids) or ISO 8633 (solids), witness assay, tank cleanliness and ullage survey, sealed samples
Internal QA gate: Per-lot port-laboratory CoA issued before B/L; SDS, UN number and packing group verified; an out-of-specification lot is rejected at the loading port, never re-graded or renegotiated
HS codes: 2815.11 · 2815.12 · 2836.20 · 2807.00 · 2806.10 · 2828.90 · 2836.50

QA verification chain

Verification chain5 gates · every consignment

1

Producer plant

Producer CoA and SDS reviewed against contract; evaporator release for caustic, calciner release for soda ash

EvidenceProducer CoA, SDS

EGG QA division · per lot
2

Storage and filling

Dedicated tanks and lines, ISO-tank T-code and CSC check, moisture-tight bagging of hygroscopic solids, seals

EvidenceFilling log, tank inspection record

EGG port QC · per lot
3

Port laboratory

ASTM E291 / E359 / E223 / E224 assay, iron, chloride, carbonate, density, moisture

EvidencePer-lot CoA before B/L

EGG port QC · per lot
4

Independent inspection

Sampling, witness assay, ullage and density survey, container / tank condition, sealing

EvidenceSGS / TÜV Austria / Intertek certificate

Appointed body · per shipment
5

Destination acceptance

Buyer re-test against the CoA and sealed loading-port samples; voyage condition under B/L and marine insurance

EvidenceCoA, inspection certificate, B/L

Buyer · on discharge

Applications & markets

Caustic soda and soda ash for alumina, detergents, glass, textiles and pulp — chlor-alkali and salt, glass and ceramics, pulp and textile; acids for fertilizer, mining, oil and gas acidising and steel and metal pickling; hypochlorite for water treatment. Market context: Egypt caustic soda market. Related: solvents and acids, water-treatment chemicals.

Standards & documentation

ASTM E291, E359, E223, E224; AWWA B300; ADR / IMDG class 8 documentation; REACH evidence for EU destinations.
ISO 9001 certified supply · quality and compliance · documentation · inspection · HS codes · Incoterms 2020.

Chemicals

Other product lines in chemicals

Chemicals overview →

Water-Treatment Chemicals5 SKUs LPG & Gas2 SKUs Petroleum Products3 SKUs Plastics & Rubber2 SKUs Polymers5 SKUs Solvents & Acids2 SKUs

Frequently asked questions

What is in the Industrial Chemicals catalogue?

Egypt Globe Group supplies this production — caustic soda flakes 98 % (membrane grade) and liquid 48–50 %, soda ash dense 99.2 % (light on request), sulphuric acid 98 %, hydrochloric acid 33–35 %, sodium hypochlorite 12 % and ground calcium carbonate 98 % from Suez — and adds re-export from China, Turkey, the EU and the USA when volume or grade requires it. There are 7 SKUs in the catalogue.

What is the minimum order for Industrial Chemicals, and how is it packed?

Containerised (FCL): 20–25 MT (one ISO tank or 20' FCL of bagged solids); hypochlorite 10 MT; per-SKU minimum 50–100 MT for acids, flakes and soda ash; break-bulk / parcel tanker: 100 MT; maximum parcels 2,000 MT HCl, 5,000 MT sulphuric acid, 10,000 MT flakes or soda ash. Packing — ISO tank · tank truck · IBC 1,000 L · drums (liquids) · 25 kg PE-lined bags and 1 MT FIBC (solids). Sold FOB / CFR / CIF; DAP / DDP and EXW on request.

Which Egyptian ports load Industrial Chemicals, and how long is the lead time?

Loading ports are Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK). Lead time is 2–4 weeks from a confirmed order.

What testing does each lot of Industrial Chemicals pass before the Bill of Lading?

At the port laboratory gate: ASTM E291 / E359 / E223 / E224 assay, iron, chloride, carbonate, density, moisture. Per-lot port-laboratory CoA issued before B/L; SDS, UN number and packing group verified; an out-of-specification lot is rejected at the loading port, never re-graded or renegotiated. An independent inspector can be appointed — SGS (TÜV Austria for EU / GCC, Intertek on request): sampling per ASTM D4057 (liquids) or ISO 8633 (solids), witness assay, tank cleanliness and ullage survey, sealed samples.

Which standards and export documents apply to Industrial Chemicals?

ASTM E291, E359, E223, E224; AWWA B300; ADR / IMDG class 8 documentation; REACH evidence for EU destinations. HS code: 2815.11 · 2815.12 · 2836.20 · 2807.00 · 2806.10 · 2828.90 · 2836.50.

Other questions? Email our export desk — the export desk replies to every request.

Send the specification and the tonnage.

Grade, packing, destination and quantity — the export desk comes back with a priced FOB / CIF / CFR offer for Industrial Chemicals once stock, laycan and freight are confirmed.

Request a Quote