Skip to main content
Egypt Globe Group
Application

Bulk Salt for Chlor-Alkali

Premium chlor-alkali bulk salt — vacuum-evaporated Egyptian sea salt with SO₄ ≤ 0.08%, Ca ≤ 50 ppm, Mg ≤ 20 ppm target. Membrane-cell compatible. PVC production grade also available. Per-lot CoA before B/L.

01

Bulk salt for chlor-alkali — membrane-cell premium NaCl

For membrane-cell electrolysis, salt purity is everything. Our premium chlor-alkali grade is vacuum-evaporated Egyptian sea salt purpose-built for ion-exchange membrane compatibility, produced from North Sinai / Red Sea brine and refined to NaCl ≥ 99.3 % with sulphate held at ≤ 0.08 %. A Siwa Oasis rock-salt membrane grade (NaCl ≥ 99 %) is available for plants that prefer mined feed.

The cost of an off-spec salt lot in a membrane plant is measured in membrane life and kWh per tonne of NaOH, not in the salt invoice. Egypt Globe Group was built around an internal Quality Assurance division from incorporation in 2014; every evaporator batch is assayed, and every shipped lot carries a port-laboratory Certificate of Analysis issued before the B/L. Lots outside the CoA are rejected at the loading port — zero tolerance on specification deviation.

02

Specs — Chlor-Alkali Premium

  • NaCl ≥ 99.5%
  • SO₄ ≤ 0.08% (membrane-safe limit)
  • Ca ≤ 50 ppm
  • Mg ≤ 20 ppm
  • Fe ≤ 1 ppm
  • Heavy metals (Pb / Hg / Cd / As) ≤ 1 ppm each
  • Iodine free
03

Industry requirements

RequirementTypical tender specificationHow EGG verifies itEvidence issued
NaCl≥ 99.3–99.5 % dry basisTitration per lotCoA before B/L
SulphateSO₄ ≤ 0.08 % (membrane); ≤ 0.15 % (PVC / diaphragm)Gravimetric BaSO₄ per lotCoA
Calcium + magnesiumCa ≤ 50–1,000 ppm, Mg ≤ 20–300 ppm per plant brine designICP / complexometric per lotCoA
Insolubles≤ 0.03–0.05 %Gravimetric per lotCoA
IronFe ≤ 1 ppm targetICP per lotCoA
Moisture≤ 0.3–0.4 %Oven-drying per lotCoA
Iodine / additivesIodine-free, no anti-cakingProcess exclusion + assayDeclaration on CoA
Particle size0.3–0.8 mm (fast dissolution) or 0.5–2 mmSieve per lotSieve report
04

Matched supply

  • Premium chlor-alkali low-SO₄

    Grade / spec headlineNaCl ≥ 99.30 %, SO₄ ≤ 0.08 %, Ca ≤ 0.10 %, Mg ≤ 0.03 %, insolubles ≤ 0.03 %, 0.3–0.8 mm, ≤ 0.30 % moisture
    DivisionSalt — sea (vacuum)
    StandardMembrane-cell spec, REACH, ISO 9001
    MOQ240 MT
  • PVC production premium

    Grade / spec headlineNaCl ≥ 99.20 %, SO₄ ≤ 0.15 %, Ca ≤ 0.12 %, Mg ≤ 0.05 %, 0.5–2 mm
    DivisionSalt — sea (vacuum)
    StandardPVC industry spec, REACH
    MOQ240 MT
  • Chemical grade pure

    Grade / spec headlineNaCl ≥ 99.50 %, Ca ≤ 0.03 %, Mg ≤ 0.02 %, SO₄ ≤ 0.15 %, insolubles ≤ 0.03 %
    DivisionSalt — sea (vacuum)
    StandardISO 9001, REACH
    MOQ240 MT
  • Rock salt — chlor-alkali membrane grade

    Grade / spec headlineNaCl ≥ 99 %, Siwa / Qattara
    DivisionSalt — rock
    StandardISO 9001, SGS
    MOQ240 MT
  • Salt brine solution 26° Baumé

    Grade / spec headlineSaturated NaCl brine
    DivisionSalt — rock
    StandardISO 9001
    MOQ240 MT

Loading ports: sea grades from Al-Arish (EGAAC), Port Said East (EGPSE), Damietta (EGDAM), Ain Sokhna (EGSOK); rock grade from El Dekheila (EGEDK), Alexandria (EGALY), Damietta, Ain Sokhna. Bulk vessel 2,000–65,000 MT, 1–1.5 MT FIBC or 50 kg bags; FOB / CFR / CIF. HS 2501.00.

See chlor-alkali SKUs — filter for "Chlor-Alkali"

05

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Source

    Brine assay at the North Sinai / Red Sea pans; mine-face assay at Siwa

    EvidenceSource lab report

    EGG QA saltworks / mine lab · every lot

  2. 2

    Processing

    Vacuum evaporation with SO₄ and hardness trended per batch; no iodine, no anti-caking

    EvidenceEvaporator batch record

    EGG QA · every batch

  3. 3

    Port laboratory

    NaCl, SO₄, Ca, Mg, Fe, insolubles, moisture per lot

    EvidenceCoA before B/L; out-of-spec lot rejected

    EGG port-side QC · every lot

  4. 4

    Independent inspection

    Sampling per ISO, sealed retained samples, witness SO₄ / hardness test, draft survey

    EvidencePSI certificate

    TÜV Austria, SGS, Intertek, Bureau Veritas · per shipment on request

  5. 5

    Destination acceptance

    Plant brine lab check against CoA; spec guaranteed at port of loading

    EvidenceBuyer acceptance

    Buyer · per shipment

Priced offers

Ready for a quote?

FOB / CIF / CFR pricing from 7 Egyptian ports — turnaround once stock, laycan and freight are confirmed.

Request Quote

More in Application

Frequently asked questions

What specification is required for membrane-cell chlor-alkali salt?
NaCl ≥ 99.3–99.5 % dry basis; Sulphate: SO₄ ≤ 0.08 % (membrane); ≤ 0.15 % (PVC / diaphragm); Calcium + magnesium: Ca ≤ 50–1,000 ppm, Mg ≤ 20–300 ppm per plant brine design; Insolubles ≤ 0.03–0.05 %. The requirements table lists all 8 parameters.
What is offered for membrane-cell chlor-alkali salt?
5 matched entries: Premium chlor-alkali low-SO₄, PVC production premium, Chemical grade pure, Rock salt — chlor-alkali membrane grade, Salt brine solution 26° Baumé.
How is quality proven on a membrane-cell chlor-alkali salt shipment?
At the port laboratory gate: NaCl, SO₄, Ca, Mg, Fe, insolubles, moisture per lot — CoA before B/L; out-of-spec lot rejected. An independent inspector can be appointed — Sampling per ISO, sealed retained samples, witness SO₄ / hardness test, draft survey.
Where is membrane-cell chlor-alkali salt shipped, and what conformity applies?
EU chlor-alkali and PVC producers (Italy, Germany, Spain), Turkey — REACH-registered; GCC membrane plants (KSA) — PAFTA origin; India and China soda-ash and chlor-alkali — BIS where the plant requires.

Other questions? Email our export desk — the export desk replies to every request.