Skip to main content
Egypt Globe Group
Application

Chlor-Alkali & Chemical

Chlor-alkali electrolysis, PVC, caustic soda manufacture, chemical feedstock with strict SO₄ / Ca / Mg caps — Siwa rock salt and vacuum-evaporated sea salt, membrane-cell grade SO₄ ≤ 0.08 %, per-lot CoA before B/L.

01

Salt for chlor-alkali and chemical manufacturing

Chlor-alkali producers (electrolysis of brine to chlorine + caustic soda + hydrogen), PVC manufacturers, soda-ash plants and chemical synthesis operations are the largest consumers of industrial-grade salt worldwide. Egypt Globe Group ships chlor-alkali-grade Egyptian salt from two sources: Siwa Oasis / Qattara Depression crystalline rock salt (≥ 97.00 % NaCl, lump and coarse for brine wells and low-spec electrolysis) and vacuum-evaporated North Sinai / Red Sea sea salt refined to membrane-cell purity (NaCl ≥ 99.3 %, SO₄ ≤ 0.08 %) for chemical plants across the Mediterranean, MENA, Far East and Africa.

A membrane cell does not forgive variation: a single lot with sulphate or hardness above the brine-purification design point shortens membrane life and raises power consumption for months. Many regional suppliers ship from changing pans without a fixed assay window. EGG's Quality Assurance division samples every evaporator batch and every mine lot, and the port laboratory confirms NaCl, Ca, Mg, SO₄ and insolubles per lot before the Certificate of Analysis and B/L are issued. A lot outside the CoA is rejected at the loading port — never re-graded.

02

Industry requirements

RequirementTypical tender specificationHow EGG verifies itEvidence issued
NaCl content≥ 97 % (membrane cell, rock feed) or ≥ 95 % (mercury / diaphragm); ≥ 99.3–99.5 % premium membrane gradeTitration at source lab and port lab, per lotCoA before B/L
SulphateSO₄ ≤ 0.3 % general; ≤ 0.08–0.15 % membrane / PVC premium — high SO₄ poisons the membraneGravimetric BaSO₄ per lotCoA
HardnessCa ≤ 0.05 %, Mg ≤ 0.02 % membrane grade; Ca ≤ 0.3 %, Mg ≤ 0.2 % rock feedComplexometric / ICP per lotCoA
Insolubles≤ 0.05 % premium (≤ 0.03 % achieved); ≤ 0.2–0.5 % rock feed — protects the brine purification stepGravimetric per lotCoA
Particle size0.3–2 mm vacuum grades for dissolvers; 5–50 mm lump / coarse for direct-feed brine wellsSieve analysis per lotSieve report
Moisture≤ 0.3–0.4 % vacuum grades; ≤ 1.5 % rockOven-drying per lotCoA
Heavy metalsPb, As, Cd, Hg reported where the plant's brine spec requiresICP-MS on requestCoA panel
RegulatoryEU REACH registration, SDSREACH-registered SKUsREACH statement, SDS
03

Matched supply

ProductGrade / spec headlineDivisionStandardMOQ
Premium chlor-alkali low-SO₄ sea saltNaCl ≥ 99.30 %, SO₄ ≤ 0.08 %, Ca ≤ 0.10 %, Mg ≤ 0.03 %, insolubles ≤ 0.03 %, 0.3–0.8 mmSalt — seaMembrane-cell spec, REACH240 MT
PVC production premium gradeNaCl ≥ 99.20 %, SO₄ ≤ 0.15 %, 0.5–2 mmSalt — seaPVC industry spec, REACH240 MT
Chemical grade pure sea saltNaCl ≥ 99.50 %, Ca ≤ 0.03 %, Mg ≤ 0.02 %, SO₄ ≤ 0.15 %Salt — seaISO 9001, REACH240 MT
Chlor-alkali rock salt — membrane gradeNaCl ≥ 99 %, Siwa / QattaraSalt — rockISO 9001, SGS240 MT
Rock salt — industrial coarse 3–5 mmNaCl ≥ 97.00 %, insolubles ≤ 0.20 %Salt — rockISO 9001240 MT
Rock salt — lump / run of mine 10–50 mmNaCl ≥ 97.00 %, brine-well feedSalt — rockISO 9001240 MT
Rock salt — mine grade wholesale 5–50 mmNaCl ≥ 97.00 %, SO₄ ≤ 0.40 %, insolubles ≤ 0.25 %Salt — rockISO 9001240 MT
Sea salt — industrial granularNaCl ≥ 97.00 %, 0.5–3 mm, general electrolysis + soda-ash feedstockSalt — seaISO 9001240 MT
Salt brine solution 26° BauméDissolved-form delivery, cuts the plant's dissolution stepSalt — rockISO 9001240 MT
Industrial grade catalogue — 17 SKUsRock and sea, chlor-alkali to tanningSaltISO 9001240 MT; vessel 2,000–65,000 MT

Loading ports: rock from El Dekheila (EGEDK), Alexandria (EGALY), Damietta (EGDAM), Ain Sokhna (EGSOK); sea from Al-Arish (EGAAC), Port Said East (EGPSE), Damietta (EGDAM), Ain Sokhna (EGSOK). Packing: bulk vessel, 1–1.5 MT FIBC, 50 kg PP bags. HS 2501.00.

04

QA verification chain

Verification chain5 gates · every consignment
  1. 1

    Source

    Mine-face assay (Siwa / Qattara) or pan-brine assay (North Sinai / Red Sea) — NaCl, Ca, Mg, SO₄

    EvidenceSource lab report

    EGG QA on-site lab · every lot

  2. 2

    Processing

    Washing, vacuum evaporation or crushing / screening; SO₄ and hardness trended per batch

    EvidenceBatch record, sieve analysis

    EGG QA · every batch

  3. 3

    Port laboratory

    NaCl, moisture, SO₄, Ca, Mg, insolubles, sieve per lot

    EvidenceCoA before B/L; out-of-spec lot rejected

    EGG port-side QC · every lot

  4. 4

    Independent inspection

    Sampling per ISO, draft survey, sealed retained samples, witness SO₄ / hardness test

    EvidencePSI certificate

    TÜV Austria (EU / GCC), SGS, Intertek, Bureau Veritas · per shipment on request

  5. 5

    Destination acceptance

    Plant brine laboratory check against CoA; spec guaranteed at port of loading under the sales contract

    EvidenceBuyer acceptance

    Buyer · per shipment

05

Destination markets & compliance

07

Request a quote

Send the plant's brine specification (SO₄, Ca, Mg, insolubles) and monthly offtake; the trade desk returns a matched grade, CoA template and lane cost once stock, laycan and freight are confirmed. Request a quote or browse matching products → or request a quote.

Salt for this industry

0 products matching this application.

No products tagged for this application yet. Request a quote →

Frequently asked questions

Which parameters matter most for chlor-alkali and chemical-grade salt?
NaCl content ≥ 97 % (membrane cell, rock feed) or ≥ 95 % (mercury / diaphragm); ≥ 99.3–99.5 % premium membrane grade; Sulphate: SO₄ ≤ 0.3 % general; ≤ 0.08–0.15 % membrane / PVC premium — high SO₄ poisons the membrane; Hardness: Ca ≤ 0.05 %, Mg ≤ 0.02 % membrane grade; Ca ≤ 0.3 %, Mg ≤ 0.2 % rock feed; Insolubles ≤ 0.05 % premium (≤ 0.03 % achieved); ≤ 0.2–0.5 % rock feed — protects the brine purification step. The requirements table lists all 8 parameters.
What is offered for chlor-alkali and chemical-grade salt?
10 matched entries: Premium chlor-alkali low-SO₄ sea salt, PVC production premium grade, Chemical grade pure sea salt, Chlor-alkali rock salt — membrane grade, Rock salt — industrial coarse 3–5 mm, Rock salt — lump / run of mine 10–50 mm.
What testing does chlor-alkali and chemical-grade salt pass before loading?
At the port laboratory gate: NaCl, moisture, SO₄, Ca, Mg, insolubles, sieve per lot — CoA before B/L; out-of-spec lot rejected. An independent inspector can be appointed — Sampling per ISO, draft survey, sealed retained samples, witness SO₄ / hardness test.
Which markets and conformity regimes apply to chlor-alkali and chemical-grade salt?
European PVC manufacturers (Italy, Germany, Spain, Turkey) — REACH-registered grades, EUR.1 origin; MENA chlor-alkali plants (KSA, Egypt domestic) — SASO / SABER where required, PAFTA origin; Far East soda-ash producers (China, India) — BIS where applicable.
Which specifications govern chlor-alkali and chemical-grade salt?
ASTM E534 (chemical analysis of NaCl), EU PVC industry standards, GOEIC origin certification (plain-text references). ISO 9001:2015 for salt suppliers · HS 2501 reference.

Other questions? Email our export desk — the export desk replies to every request.