Contents· 7 sections
Overview
Siwa Oasis / Qattara Depression · NaCl ≥ 97.00% · particle size 0.20–6.30 mm · extra coarse grain · moisture ≤ 1.5% · minimum order 240 MT. Every lot is tested at source and again at the port of loading; the Certificate of Analysis is issued before the Bill of Lading.
Siwa Oasis and Qattara Depression rock salt — crystalline halite from deposits formed 30+ million years ago, free of marine contaminants, tested at the mine-site laboratory on every production lot and re-tested at the port. Guaranteed minimum 97.00 % NaCl on every rock-salt grade. Natural moisture grades of 1.0 % and 1.5 %; kiln-dried to ≤ 0.25 %, ≤ 0.5 % or ≤ 1.0 % (winter) on request. Loads at El Dekheila (EGEDK), Alexandria (EGALY), Damietta (EGDAM) and Ain Sokhna (EGSOK).
Supplied pre-wetted with MgCl₂ / NaCl brine for direct spreader loading.
Quality at the Core — how this product is verified
Egypt Globe Group has operated with an internal Quality Assurance division since its 2014 incorporation. Port laboratory — NaCl, Ca, Mg, SO₄, insolubles, moisture and sieve analysis on every lot; CoA issued before B/L. A lot that falls outside its Certificate of Analysis is rejected at the loading port — never re-graded or renegotiated. Independent pre-shipment inspection by TÜV Austria · SGS · Intertek · Bureau Veritas is available on every consignment. Specification is guaranteed at the port of loading and binding under the sales contract.
Mined from Egypt's ancient halite deposits
- Underground rock-salt mines, ancient deposits formed by paleoenvironmental seas
- Crusher → washer → screen → dryer → packing line
- Natural moisture grades 1.0% and 1.5% — kiln-dried to ≤ 0.25%, ≤ 0.5% or ≤ 1.0% (winter) on request
- Ideal for de-icing, chlor-alkali, drilling fluids, water softening
Specifications
QA verification chain — extraction to destination port
- 1
Extraction / source
Source sampling on every production lot (mine face, pan, plant, packhouse)
Source lab · per lot
- 2
Processing
Washing, screening, drying, grading or milling verified against the contract specification
Plant QC · per batch
- 3
Port laboratory
Full analysis against contract spec; Certificate of Analysis issued before the Bill of Lading
Port QC lab · per shipment
- 4
Independent inspection
Pre-shipment sampling, witness testing, draft survey or tally; sealed retained samples held 90 days
SGS / TÜV / Intertek / BV · per vessel
- 5
Destination acceptance
CoA cross-referenced with the buyer’s arrival laboratory; retained samples arbitrate any variance
Buyer lab · on discharge
Physical properties
10 parameters| Parameter | Specification |
|---|---|
| Colour● | White/Natural |
| Moisture, max● | 1.5% |
| Appearance | White crystalline solid |
| Grain class | Extra coarse |
| Bulk density | 950.00–1200.00 kg/m³ |
| Particle size | 0.20–6.30 mm |
| Moisture, typical | 1.0 % or 1.5 % natural grades |
| Shelf life | 36 months |
| Storage | Store in a cool, dry place away from moisture |
| Kiln-drying options | ≤ 0.25 %, ≤ 0.5 % or ≤ 1.0 % (winter) moisture, on request |
Chemical analysis
5 parameters| Parameter | Limit |
|---|---|
| NaCl (dry basis)● | ≥ 97.00% |
| Calcium (Ca²⁺), max | ≤ 0.4000% |
| Magnesium (Mg²⁺), max | ≤ 0.4000% |
| Sulphate (SO₄²⁻), max | ≤ 0.80% |
| Water insolubles, max | ≤ 0.50% |
Logistical & QA parameters
- MOQ — containerised (FCL)
- 240 MT (10×20ft FCL)
- MOQ — break-bulk vessel
- 2,000 MT bulk · up to 65,000 MT bulk
- Shipping options
- 10×20ft FCL containers (240 MT) · bulk vessel 2,000–65,000 MT
- Packing
- 50 kg PP woven bags · 1 MT FIBC jumbo bags · Bulk vessel
- Loading ports
- El Dekheila · Alexandria · Damietta · Ain Sokhna
- Incoterms
- FOB · CFR · CIF (DAP / DDP on request)
- Lead time
- 2–3 weeks from L/C or advance
- Processing
- Natural (undried mined) OR kiln-dried to buyer spec
- Independent inspection protocol
- TÜV Austria · SGS · Intertek · Bureau Veritas — Pre-shipment sampling per ISO 11648-2; NaCl, moisture and sieve witness tests; draft survey on bulk vessels; sealed retained samples
- Internal QA gate
- Port laboratory — NaCl, Ca, Mg, SO₄, insolubles, moisture and sieve analysis on every lot; CoA issued before B/L. Lot rejected if any parameter falls outside specification.
- Documents
- Commercial Invoice · Packing List · B/L · Certificate of Origin (Egyptian Chamber of Commerce; EUR.1 / PAFTA / COMESA / AfCFTA) · CoA
- HS code
- 2501.00
● Required parameter — tested on every shipment before the Bill of Lading. Values are contractual limits guaranteed at the port of loading. Independent third-party verification is typically 0.3–0.5 % of FOB value. Commodity master: PS_ROCK_DEIC_PW.
Certifications & standards
Certificates of Analysis
Certificates of Analysis
1 active CoA across 1 market. Issued by our Egypt Globe QC Lab — third-party verification (SGS / Intertek / Bureau Veritas / TUV) on request.
PASS — Egypt Globe QC Lab analysis
Measured parameters
Default GLOBAL CoA. Region-specific (EU / GCC / Far East / Americas / etc.) certificates issued per shipment on request.
Per-shipment CoAs are issued by our internal Egypt Globe QC Lab. Independent third-party verification (SGS Egypt / Intertek Cairo / Bureau Veritas / TUV) is available on request, typically at 0.3-0.5% of FOB value. Region-specific certificates attest compliance with the destination market's standard (EN 197-1 / ASTM C150 / GB/T / KEBS / SASO / FCO etc.).
Applications & packing
Where Egyptian Bulk Rock Salt for Deicing — Pre-Wetted (MgCl₂/NaCl Brine) is used
Packing & Containerisation
27 formats · loaded as FIBC / bagged / bulk on container or bulk vessel. Inner liners, laminate, OEM print, and bag-in-jumbo all available.
Direct loading into vessel hold. No packing cost. Minimum 5,000 MT per shipment.
PE container liner bag. ~22 MT per 20ft container. No individual packing. Discharged by grab or tipping.
50 kg net. 5-layer PP woven. UV stabilised. 420 bags per 20ft container (~21 MT). OEM print available.
50 kg net. PP woven + BOPP laminate. Moisture barrier. Glossy print quality. Popular for retail chains.
50 kg net. 3-ply kraft. Valve or open-mouth. Biodegradable. Preferred for EU food-grade markets.
25 kg net. 840 bags per 20ft container (~21 MT). OEM print. Popular for retail / wholesale.
25 kg net. Premium laminate. Full-colour CMYK OEM print. For branded consumer salt products.
5 kg net. BOPP laminated. Hanging hole. For retail shelf. ~4,200 bags / 20ft container (~21 MT).
50 kg net. PE woven (polyethylene). Better chemical compatibility than PP for caustic soda, soda ash, citric acid. Food-contact safe (EU 10/2011). UV stabilised. ~420 bags per 20ft container.
25 kg net. PE woven. Same chemical compatibility as 50kg PE. ~840 bags per 20ft container. Popular for retail food and pharma chemical markets in EU.
50 kg net. 3-ply kraft outer + HDPE inner liner. Combined biodegradable + moisture barrier. EU & US food-grade preferred for cement, fertilizers, hygroscopic chemicals.
1,000 kg SWL. 4-loop lift. Stackable. Standard for bulk vessel stow and container stuffing.
As above with 200-micron PE inner liner. Required for food-grade and hygroscopic grades.
High-capacity jumbo for large bulk vessels. More efficient loading rate per lift.
Super-sack for Capesize / Panamax. Requires crane SWL certification ≥ 2 MT.
~40 × 25 kg bags per 1MT FIBC jumbo. Bags are hand-stacked and sealed inside the FIBC before vessel loading. OEM print available on inner bags.
~20 × 50 kg bags per 1MT FIBC jumbo. Most common bag-in-jumbo config for bulk export. OEM print available on inner bags.
~20 × 50 kg laminated bags inside 1MT FIBC. Moisture protection. Popular for food-grade and chemical markets.
~20 × 50 kg kraft bags inside 1MT FIBC. Biodegradable inner. EU food-grade preferred. Requires dry stow.
~40 × 25 kg premium laminated bags inside 1MT FIBC. For branded consumer salt via bulk shipment.
~20 × 50 kg bags inside PE-lined FIBC. Double moisture barrier — mandatory for Vacuum and Food Grade salt in bulk.
Any custom inner bag (size/material/print) stacked inside 1MT FIBC. Lead time +15 days for bag printing. MOQ 250 MT.
~40 × 25 kg PE woven inner bags per 1MT FIBC. Better chemical compatibility than PP for caustic / soda / citric / hygroscopic chemicals. OEM print on inner bags.
~20 × 50 kg PE woven inner bags per 1MT FIBC. Standard PE-in-jumbo for chemical and food-contact bulk. OEM print on inner bags.
~20 × 50 kg PE inner bags inside PE-lined FIBC. Triple PE moisture barrier — for hygroscopic chemicals, vacuum salt, ultra-pure pharmacopoeia.
~20 × 50 kg HDPE-lined kraft inner bags inside 1MT FIBC. EU & US food-grade preferred for cement, fertilizers and hygroscopic chemicals shipped in bulk.
Custom size, material, print, and inner liner per buyer specification. MOQ 25 MT. Lead time +15 days.
Bag-in-Jumbo means any inner bag (PP / PE / Kraft / Laminated) can be hand-stacked inside a 1MT FIBC and loaded on a bulk vessel — combines retail-ready packing with bulk-vessel economics. OEM printing, custom sizes, and inner liners on request. View packing services →
Logistics & transit
Transit time calculator
Pick loading port + destination region — get indicative transit, routing, and total order-to-arrival lead time.
Loads from
Resident EGG stevedoring, agency and port-QC teams at every berth.
Ships to
Export documents
Documents shipped with every consignment
Click any row to expand. Advance PDF goes by email for L/C bank lodging; originals follow by DHL / FedEx.
Request a quote
Get a priced offer
Pre-filled with Egyptian Bulk Rock Salt for Deicing — Pre-Wetted (MgCl₂/NaCl Brine). Add quantity + email and we'll do the rest.
Ready for a quote?
FOB / CIF / CFR pricing from 7 Egyptian ports — turnaround once stock, laycan and freight are confirmed.
More in Salt
Egyptian Bulk Rock Salt for Deicing — EU Grade A 0/2 mm Fine
NaCl ≥ 97.00% · 0/2 mm fine grain · moisture 1.5%
Egyptian Bulk Sea Salt for Deicing — EU Grade A 0/6.3 mm (EN 16811-1 motorway)
NaCl ≥ 97.00% · eu grade a grain · moisture ≤ 1.00%
Egyptian Bulk Sea Salt for Deicing — EU Grade A 0/2 mm Fine
NaCl ≥ 97.00% · 0/2 mm fine grain · moisture ≤ 1.00%
Egyptian Bulk Rock Salt for Deicing — US/Canada Grade 2 2.0–4.75 mm Fine (ASTM D632)
NaCl ≥ 97.00% · 2.0–4.75 mm fine grain · moisture 1.5%
Frequently asked about Egyptian Bulk Rock Salt for Deicing
Common procurement questions for this product. Other questions? Email [email protected].
What is the NaCl purity of Egyptian Bulk Rock Salt for Deicing?
What packing formats are available for Egyptian Bulk Rock Salt for Deicing?
What is the minimum order quantity (MOQ) for Egyptian Bulk Rock Salt for Deicing?
What is the lead time for Egyptian Bulk Rock Salt for Deicing?
What certifications does Egyptian Bulk Rock Salt for Deicing carry?
Other questions? Email our export desk — the export desk replies to every request.
Related — bulk-salt buyer resources
Spec, standard, port, and buyer's guide pages for this SKU.