Contents· 7 sections
Overview
North Sinai (El-Arish / Bardawil) + Red Sea coast · NaCl ≥ 67.00% · particle size 0.30–1.00 mm · fine 0.3-1 mm grain · moisture ≤ 0.20% · minimum order 240 MT. Every lot is tested at source and again at the port of loading; the Certificate of Analysis is issued before the Bill of Lading.
Quality at the Core — how this product is verified
Egypt Globe Group has operated with an internal Quality Assurance division since its 2014 incorporation. Port laboratory — NaCl, Ca, Mg, SO₄, insolubles, moisture and sieve analysis on every lot; CoA issued before B/L. A lot that falls outside its Certificate of Analysis is rejected at the loading port — never re-graded or renegotiated. Independent pre-shipment inspection by TÜV Austria · SGS · Intertek · Bureau Veritas is available on every consignment. Specification is guaranteed at the port of loading and binding under the sales contract.
Solar-evaporated from Egypt's coastal pans
- Saltworks fed by Mediterranean / Red Sea — solar-driven evaporation cycle
- ~2,700 kWh/m² annual irradiance — the highest in the Mediterranean basin
- Naturally mineral-balanced (Mg, K, Br retained at trace levels)
- Ideal for food-grade table salt, cosmetic, pharmaceutical, pool
Specifications
QA verification chain — extraction to destination port
- 1
Extraction / source
Source sampling on every production lot (mine face, pan, plant, packhouse)
Source lab · per lot
- 2
Processing
Washing, screening, drying, grading or milling verified against the contract specification
Plant QC · per batch
- 3
Port laboratory
Full analysis against contract spec; Certificate of Analysis issued before the Bill of Lading
Port QC lab · per shipment
- 4
Independent inspection
Pre-shipment sampling, witness testing, draft survey or tally; sealed retained samples held 90 days
SGS / TÜV / Intertek / BV · per vessel
- 5
Destination acceptance
CoA cross-referenced with the buyer’s arrival laboratory; retained samples arbitrate any variance
Buyer lab · on discharge
Physical properties
10 parameters| Parameter | Specification |
|---|---|
| Colour● | White |
| Moisture, max● | ≤ 0.20% |
| Appearance | Fine crystal blend |
| Grain class | Fine 0.3-1 mm |
| Bulk density | 1150.00–1350.00 kg/m³ |
| Particle size | 0.30–1.00 mm |
| Shelf life | 24 months |
| Storage | Sealed bags, ambient |
| Kiln-drying options | 1.5% / 0.5% / 0.25% / spec on request |
| Moisture, kiln-dried | ≤ 1.5% (custom dryer below on request) |
Chemical analysis
10 parameters| Parameter | Limit |
|---|---|
| NaCl (dry basis)● | ≥ 67.00% |
| Arsenic (As), max | ≤ 0.000 ppm |
| Calcium (Ca²⁺), max | ≤ 0.1000% |
| Cadmium (Cd), max | ≤ 0.000 ppm |
| Mercury (Hg), max | ≤ 0.000 ppm |
| Magnesium (Mg²⁺), max | ≤ 0.0500% |
| Lead (Pb), max | ≤ 0.000 ppm |
| Sulphate (SO₄²⁻), max | ≤ 0.30% |
| pH (5 % solution) | 7.0–7.5 |
| Water insolubles, max | ≤ 0.10% |
Logistical & QA parameters
- MOQ — containerised (FCL)
- 240 MT (10×20ft FCL)
- MOQ — break-bulk vessel
- 2,000 MT bulk · up to 65,000 MT bulk
- Shipping options
- 10×20ft FCL containers (240 MT) · bulk vessel 2,000–65,000 MT
- Packing
- 500g bags · 1kg bags · 25kg bags
- Loading ports
- Al-Arish · Port Said East · Damietta · Ain Sokhna
- Incoterms
- FOB · CFR · CIF (DAP / DDP on request)
- Lead time
- 3–4 weeks from L/C or advance
- Processing
- Vacuum-evaporated (food / pharma)
- Independent inspection protocol
- TÜV Austria · SGS · Intertek · Bureau Veritas — Pre-shipment sampling per ISO 2479 / EN 16811-1 Annex B; NaCl, moisture and sieve witness tests; draft survey on bulk vessels; sealed retained samples
- Internal QA gate
- Port laboratory — NaCl, Ca, Mg, SO₄, insolubles, moisture and sieve analysis on every lot; CoA issued before B/L. Lot rejected if any parameter falls outside specification.
- Documents
- Commercial Invoice · Packing List · B/L · Certificate of Origin (Egyptian Chamber of Commerce; EUR.1 / PAFTA / COMESA / AfCFTA) · CoA
- HS code
- 2501.00.91
● Required parameter — tested on every shipment before the Bill of Lading. Values are contractual limits guaranteed at the port of loading. Independent third-party verification is typically 0.3–0.5 % of FOB value. Commodity master: PS_SEA_FOOD_LOWNA.
Certifications & standards
Certificates of Analysis
Certificates of Analysis
3 active CoAs across 3 markets. Issued by our Egypt Globe QC Lab — third-party verification (SGS / Intertek / Bureau Veritas / TUV) on request.
PASS — Egypt Globe QC Lab analysis
Measured parameters
Default GLOBAL CoA. Region-specific (EU / GCC / Far East / Americas / etc.) certificates issued per shipment on request.
Per-shipment CoAs are issued by our internal Egypt Globe QC Lab. Independent third-party verification (SGS Egypt / Intertek Cairo / Bureau Veritas / TUV) is available on request, typically at 0.3-0.5% of FOB value. Region-specific certificates attest compliance with the destination market's standard (EN 197-1 / ASTM C150 / GB/T / KEBS / SASO / FCO etc.).
Applications & packing
Packing & Containerisation
27 formats · loaded as FIBC / bagged / bulk on container or bulk vessel. Inner liners, laminate, OEM print, and bag-in-jumbo all available.
Direct loading into vessel hold. No packing cost. Minimum 5,000 MT per shipment.
PE container liner bag. ~22 MT per 20ft container. No individual packing. Discharged by grab or tipping.
50 kg net. 5-layer PP woven. UV stabilised. 420 bags per 20ft container (~21 MT). OEM print available.
50 kg net. PP woven + BOPP laminate. Moisture barrier. Glossy print quality. Popular for retail chains.
50 kg net. 3-ply kraft. Valve or open-mouth. Biodegradable. Preferred for EU food-grade markets.
25 kg net. 840 bags per 20ft container (~21 MT). OEM print. Popular for retail / wholesale.
25 kg net. Premium laminate. Full-colour CMYK OEM print. For branded consumer salt products.
5 kg net. BOPP laminated. Hanging hole. For retail shelf. ~4,200 bags / 20ft container (~21 MT).
50 kg net. PE woven (polyethylene). Better chemical compatibility than PP for caustic soda, soda ash, citric acid. Food-contact safe (EU 10/2011). UV stabilised. ~420 bags per 20ft container.
25 kg net. PE woven. Same chemical compatibility as 50kg PE. ~840 bags per 20ft container. Popular for retail food and pharma chemical markets in EU.
50 kg net. 3-ply kraft outer + HDPE inner liner. Combined biodegradable + moisture barrier. EU & US food-grade preferred for cement, fertilizers, hygroscopic chemicals.
1,000 kg SWL. 4-loop lift. Stackable. Standard for bulk vessel stow and container stuffing.
As above with 200-micron PE inner liner. Required for food-grade and hygroscopic grades.
High-capacity jumbo for large bulk vessels. More efficient loading rate per lift.
Super-sack for Capesize / Panamax. Requires crane SWL certification ≥ 2 MT.
~40 × 25 kg bags per 1MT FIBC jumbo. Bags are hand-stacked and sealed inside the FIBC before vessel loading. OEM print available on inner bags.
~20 × 50 kg bags per 1MT FIBC jumbo. Most common bag-in-jumbo config for bulk export. OEM print available on inner bags.
~20 × 50 kg laminated bags inside 1MT FIBC. Moisture protection. Popular for food-grade and chemical markets.
~20 × 50 kg kraft bags inside 1MT FIBC. Biodegradable inner. EU food-grade preferred. Requires dry stow.
~40 × 25 kg premium laminated bags inside 1MT FIBC. For branded consumer salt via bulk shipment.
~20 × 50 kg bags inside PE-lined FIBC. Double moisture barrier — mandatory for Vacuum and Food Grade salt in bulk.
Any custom inner bag (size/material/print) stacked inside 1MT FIBC. Lead time +15 days for bag printing. MOQ 250 MT.
~40 × 25 kg PE woven inner bags per 1MT FIBC. Better chemical compatibility than PP for caustic / soda / citric / hygroscopic chemicals. OEM print on inner bags.
~20 × 50 kg PE woven inner bags per 1MT FIBC. Standard PE-in-jumbo for chemical and food-contact bulk. OEM print on inner bags.
~20 × 50 kg PE inner bags inside PE-lined FIBC. Triple PE moisture barrier — for hygroscopic chemicals, vacuum salt, ultra-pure pharmacopoeia.
~20 × 50 kg HDPE-lined kraft inner bags inside 1MT FIBC. EU & US food-grade preferred for cement, fertilizers and hygroscopic chemicals shipped in bulk.
Custom size, material, print, and inner liner per buyer specification. MOQ 25 MT. Lead time +15 days.
Bag-in-Jumbo means any inner bag (PP / PE / Kraft / Laminated) can be hand-stacked inside a 1MT FIBC and loaded on a bulk vessel — combines retail-ready packing with bulk-vessel economics. OEM printing, custom sizes, and inner liners on request. View packing services →
Logistics & transit
Transit time calculator
Pick loading port + destination region — get indicative transit, routing, and total order-to-arrival lead time.
Loads from
Resident EGG stevedoring, agency and port-QC teams at every berth.
Ships to
Export documents
Documents shipped with every consignment
Click any row to expand. Advance PDF goes by email for L/C bank lodging; originals follow by DHL / FedEx.
Request a quote
Get a priced offer
Pre-filled with Low-Sodium Sea Salt Blend (NaCl + KCl). Add quantity + email and we'll do the rest.
Ready for a quote?
FOB / CIF / CFR pricing from 7 Egyptian ports — turnaround once stock, laycan and freight are confirmed.
More in Salt
Bulk Cosmetic Sea Salt — Bath, Spa & Dead Sea-Style Blends
Cosmetic-grade Egyptian sea salt — ISO 22716 GMP, EU REACH, Halal, ICP-MS heavy-metal tested every lot. Fine 0.3–1 mm and coarse 3–5 mm at ≥ 99 % NaCl, spa exfoliant 3–6 mm, Dead Sea-style Mg/Ca mineral blend. 500 g private label to 1 MT FIBC.
Bulk Pool & Water-Softener Salt — NSF/ANSI 60 Chlorinator Salt
NSF/ANSI 60 pool and water-softener salt — vacuum-evaporated sea salt and Siwa rock salt at ≥ 99 % NaCl, Ca + Mg ≤ 0.15 %, insolubles ≤ 0.05 %, no additives. Medium crystal, coarse, ion-exchange crystal and 8–12 mm compacted pellets. FOB / CFR / CIF from 240 MT.
Iodine-Fortified Sea Salt — ORS & Food Aid
Iodine-Fortified Salt for ORS & Food Aid — Salt. Origin: Egypt Available FOB / CIF / CFR from Egyptian ports with full L/C-bank document set.
Coarse Solar-Evaporated Sea Salt — Egyptian
Sea Salt Coarse Solar-Evaporated — Salt. Origin: Egypt, Red Sea Coast Available FOB / CIF / CFR from Egyptian ports with full L/C-bank document set.
Frequently asked about Low-Sodium Sea Salt Blend (NaCl + KCl)
Common procurement questions for this product. Other questions? Email [email protected].
What is the NaCl purity of Low-Sodium Sea Salt Blend (NaCl + KCl)?
What packing formats are available for Low-Sodium Sea Salt Blend (NaCl + KCl)?
What is the minimum order quantity (MOQ) for Low-Sodium Sea Salt Blend (NaCl + KCl)?
What is the lead time for Low-Sodium Sea Salt Blend (NaCl + KCl)?
What certifications does Low-Sodium Sea Salt Blend (NaCl + KCl) carry?
Other questions? Email our export desk — the export desk replies to every request.
Related — bulk-salt buyer resources
Spec, standard, port, and buyer's guide pages for this SKU.